Lizard Skins Oury Single Compound Grip
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Lizard Skins Oury Single Compound Grip is designed for cyclists, including both professional and amateur riders, seeking superior comfort, vibration absorption, and a secure handhold. Its large pad pattern significantly reduces numbness and prevents slipping, ensuring a better riding experience. A potential consideration is that the single compound might offer less vibration dampening than multi-compound grips for extremely rough terrain.
All features
| Brand | Lizard Skins |
|---|
Extended Product Information
FAQs
Are these grips suitable for gravel bikes?
While primarily designed for MTB and BMX, some riders might find them suitable for gravel bikes depending on their preference for grip style and vibration dampening. However, their specific pattern is optimized for off-road disciplines.
How do I clean the Oury grips?
Clean them with a damp cloth and mild soap. Rinse with clean water and wipe dry. Avoid using solvents or abrasive cleaners.
Can I use these grips on an e-bike?
Yes, if the e-bike has standard handlebar diameters (typically 22.2mm grip area), these grips are compatible. The enhanced comfort and grip can be beneficial for e-bike riders.
What is the difference between single compound and multi-compound grips?
Single compound grips use one type of rubber material throughout, offering a consistent feel. Multi-compound grips use different rubber densities in various areas to optimize grip, vibration absorption, and durability. The Oury grips offer excellent comfort with their single compound design.
How long do these grips typically last?
Durability depends on riding frequency, terrain, and maintenance. Made with high-quality materials and tested for durability, they are designed for longevity under normal use.
Are these grips lock-on?
The product description does not specify a lock-on feature. Standard Oury grips are typically slip-on and rely on a tight fit and potentially grip glue for secure mounting.
Can I cut the grips to fit shorter handlebars?
While it's possible to cut grips, it is not recommended as it can compromise the integrity of the grip and potentially lead to premature wear or slippage at the cut edge.
Troubleshooting
Grips feel too tight or difficult to install.
Apply a small amount of isopropyl alcohol to the inside of the grip or the handlebar. This acts as a temporary lubricant and will evaporate, allowing the grip to slide on more easily. Ensure you are not forcing the grip, which could damage it.
Grips are slipping during riding.
Ensure the grips were installed correctly with a secure fit. If using grip glue, make sure it has fully cured. Clean the grips and your hands to remove any oils or sweat that might reduce friction.
Excessive vibration still felt.
While designed for vibration dampening, extreme conditions may still transmit some vibration. Ensure grips are fully seated and consider using thicker gloves or exploring other handlebar dampening solutions if vibration is a persistent issue.
Grips show signs of wear after limited use.
Inspect grips for any tears or deep cuts which might indicate impacts. Ensure you are using the correct cleaning methods and avoiding abrasive materials. If wear seems premature and due to material defect, contact the retailer or manufacturer.
Pros and Cons
Pros
- Significantly improves grip comfort and reduces hand fatigue.
- Large pad pattern effectively minimizes vibrations and numbness.
- Provides a very secure and non-slip surface for hands.
- Durable construction ensures longevity.
- Compatible with a wide range of bicycles (MTB and BMX).
Cons
- May not offer the same level of advanced vibration dampening as multi-compound grips on extremely rough terrain.
- The single compound might wear faster than some harder rubber compounds under very heavy use.
- Installation can sometimes be tight, requiring specific techniques.
Setup, Compatibility & Care
Setup:
- Ensure your handlebars are clean and free of old grip residue.
- To ease installation, you can use a small amount of isopropyl alcohol or grip glue on the inside of the grip or the handlebar. *Avoid using lubricants that can degrade rubber over time.*
- Slide the grip onto the handlebar, rotating it to the desired position. For a snug fit, a gentle twisting motion may be necessary.
- Allow any adhesive to fully cure according to product instructions before riding.
Compatibility:
- These grips are specifically designed for compatibility with MTB and BMX handlebars.
- Ensure your handlebar diameter is standard for these disciplines (typically 22.2mm for grip area).
Care:
- Clean the grips regularly with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners, as they can damage the material.
- Wipe dry after cleaning. Store your bike away from direct sunlight for extended periods to prevent material degradation.