Best current price£139.34from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£139.34Visit shop Schneider Electric Schneider Tesys Gv3p18 Motor Circuit Breaker 12-18A - Gv3p18
Visit shop9 offers from £139.34 - £565.50
View price history by clicking the chart icon.
1 offer from £285.52
View price history by clicking the chart icon.
The Schneider Electric GV3L32 is a 3-pole thermal magnetic circuit breaker designed for motor protection in industrial applications. It offers reliable tripping mechanisms and a robust build for safety and longevity, though its 6 kA breaking capacity may be limiting for very high fault current scenarios. Key features include a 32A current rating, 690V AC voltage rating, DIN rail mounting, and EverLink terminals for secure connections.
| Series | TeSys |
|---|---|
| Model Part Number | GV3L32 |
| Brand | Schneider Electric |
The GV3L32 is primarily designed for motor protection, offering thermal and magnetic tripping to safeguard three-phase motors from overloads and short circuits.
The breaking capacity at the maximum voltage rating (690V AC) is 6 kA.
While it is a 3-pole breaker, it can technically be used for single-phase circuits by only connecting one or two poles, but its primary design and optimization are for three-phase applications. Ensure compliance with local electrical codes.
It means the breaker uses two mechanisms: a thermal element (bimetallic strip) to detect sustained overloads and a magnetic element to detect sudden short circuits, providing comprehensive protection.
Once the fault condition is cleared, you can reset the breaker by firmly pushing the trip lever back to the 'ON' or reset position. Ensure the cause of the trip has been identified and resolved first.
The GV3L32 comes with a warranty period of 1.5 years from the date of purchase.
The EverLink terminals are designed for copper conductors. Consult the product documentation or Schneider Electric for specific guidance on conductor compatibility.
This typically indicates a short circuit in the downstream wiring or the connected load (e.g., motor). Disconnect the load and check the wiring for faults. If the issue persists with no load connected, the breaker may be faulty.
This could be due to an overload condition (motor drawing more current than rated) or an undersized breaker. Verify the connected load's current draw against the breaker's rating (32A). Check for motor issues like bearing wear or low voltage. Ensure ambient temperature is within operating limits.
This is a critical safety issue. Immediately de-energize the circuit and replace the breaker. Do not attempt to repair the breaker. Contact Schneider Electric support if necessary.
Ensure the wire is stripped to the correct length and that no stray strands are present. Use a screwdriver of the appropriate size to tighten the terminal screw firmly. Refer to the terminal's specific instructions if provided.
Setup:
Compatibility:
Care:
