Best current price£44.95from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£44.95Visit shop 10Mm Air Belt Sander Lever Throttle For Feature Control 3 Grit Sanding Belts 3870475627760
Visit shop2 offers from £44.95 - £59.95
View price history by clicking the chart icon.
The Hymair 10mm Air Belt Sander is a specialized pneumatic tool designed for metalworkers, woodworkers, and automotive technicians who need to reach tight, confined spaces for detailed grinding and sanding. Its primary benefit is the ability to perform precise material removal in areas where larger power tools simply cannot fit, though it requires an external air compressor to function, which limits its portability for remote job sites.
| Model Part Number | BELTSANDER10 |
|---|---|
| Brand | Hymair |
This tool is designed for 10mm wide sanding belts.
Yes, provided you use the appropriate grit for the material; generally, coarse belts for metal removal and finer belts for wood finishing.
No, the tool requires a standard pneumatic connection, which must be provided separately.
It is recommended to add a few drops of air tool oil to the inlet before every use to maintain smooth operation.
The speed is controlled manually by the amount of pressure you apply to the lever throttle.
Adjust the belt tracking knob located on the side of the housing to center the belt on the rubber rollers.
Check your compressor pressure settings and ensure the air hose is not kinked or restricted.
Apply a small amount of pneumatic tool oil to the lever linkage to clear any accumulated dust or debris.
To set up the Hymair 10mm Air Belt Sander, ensure your air compressor is rated for the tool's specific PSI requirements and that your air lines are free of moisture. Always use an in-line air lubricator to extend the lifespan of the internal pneumatic motor.
Compatibility: The tool accepts standard 10mm wide sanding belts. Ensure that the belt tracking is centered before starting the motor to prevent fraying or misalignment.
Care: Regularly blow out dust from the belt housing to prevent grit buildup. After each use, add a few drops of air tool oil into the air inlet to keep the internal components lubricated and prevent rust.
