Antler Oscillating Multi Tool Blades - Coarse Wood - 35mm - Pack of 10

These blades are specifically designed for cutting wood, most plastics, and drywall. They are not recommended for cutting metal or masonry.

They are compatible with many Bosch models, but specifically exclude Bosch tools that use the Starlock mounting system.

The maximum cutting depth for these blades is 40mm.

Clean the blades after each use to remove debris and store them in a dry environment to prevent rust. Avoid dropping or bending the blades.

Coarse wood blades have larger teeth and cut faster but may leave a rougher edge. Fine wood blades have smaller teeth for slower, smoother cuts with a cleaner finish.

Yes, the coarse tooth design makes them suitable for rapid demolition cuts in wood and drywall where a perfectly smooth finish is not required.

Ensure the blade is securely fastened to the tool. Check for excessive wear or damage on the teeth. The material being cut might be too hard for this specific wood blade; consider a different blade type if cutting metal or hard composites.

Verify that the blade is correctly and tightly installed according to the multitool's instructions. Ensure the mounting system on the tool is clean and undamaged. Check if the blade itself is bent or warped.

This can occur with heavy use or cutting abrasive materials. Ensure you are using the correct blade for the material. For wood applications, if dulling is too rapid, consider using blades with higher-grade steel or a different tooth configuration.