Heavy Duty Exhaust Clamps - Pack Of 10 - 58 mm

This clamp is designed for exhaust pipes with an outer diameter of 58mm, which is approximately 2 1/4 inches.

The clamp is made of zinc-plated steel, providing good corrosion resistance.

Each pack contains 10 exhaust clamps.

Typically, a 13mm or 1/2 inch socket or spanner is required to tighten the M10 nuts.

Yes, as long as the exhaust pipe diameter is 58mm and the application requires a heavy-duty clamp. It is suitable for automotive, agricultural, and engineering uses.

When correctly sized and properly tightened on a sound exhaust pipe, this clamp is designed to create a secure, leak-free seal.

Yes, its heavy-duty construction makes it suitable for various applications, including custom fabrication, provided the size is compatible.

Verify the exhaust pipe's outer diameter is indeed 58mm. Ensure the clamp is positioned correctly and not obstructed by other components. If the pipe is slightly larger or smaller, this specific clamp size may not be suitable.

Check if the clamp is tightened sufficiently. Ensure the overlapping pipe sections are properly aligned and there are no cracks or holes in the pipes themselves. Reapply the clamp ensuring even pressure distribution.

Ensure you are using the correct size wrench (likely 13mm or 1/2 inch). If threads are seized, apply a penetrating lubricant and allow it to soak before attempting to tighten further.

This is normal wear over time. For continued performance, consider replacing the clamp if rust significantly weakens the material or compromises the seal.