Furniture Drawer Bottom Repair Wedges - GTV - 3.5x20

The wedges are made of durable, transparent plastic.

The included screws are 3.5x20 size.

These wedges are primarily designed for wood or composite materials. Use on metal may require different fastening methods and is not the intended application.

Typically, one to two wedges are sufficient for stabilizing a single drawer bottom, depending on the size and severity of the sag.

As they are transparent plastic, painting is not recommended as it may affect adhesion or appearance. They are designed to be discreet.

While they do increase load capacity, for extremely heavy items, consider reinforcing with multiple wedges or using heavier-duty hardware.

The primary purpose is to stabilize and strengthen loose or sagging furniture drawer bottoms, thereby increasing their load capacity.

Ensure the wedge is properly positioned to provide maximum support. Verify that screws are fully tightened and that the drawer bottom material itself is not excessively thin or damaged. Consider using additional wedges if needed.

The material may be too soft or the pilot hole too large. Try using slightly wider or longer screws if available and compatible with the wedge and furniture material. For very soft materials, wood filler can sometimes help create a more secure anchor point.

Adjust the positioning of the wedge. Ensure there are no obstructions. If necessary, slight sanding of the furniture surface or the wedge edge can improve fit, but ensure structural integrity is maintained.