Best current price£114.99from eBay
Shopping.co.uk recommended and popular offers
eBay£114.99Visit shop BikeTek Premium Motorcycle Lift Jack Black 500 kg Table Ground Bike Lifts
Visit shop4 offers from £114.99 - £119.99
View price history by clicking the chart icon.
The Bike-It Platform Lift Jack is designed for motorcycle maintenance, offering a versatile solution for bikes with flat or tubular frames. Its key benefit is providing stable lifting from 100mm to 340mm with adjustable supports. A potential caveat is the need for secure mounting for permanent workstation use.
| Brand | BIKE IT |
|---|
The maximum load capacity is 500kgs.
The jack is designed for lifting the motorcycle's frame, typically enabling access to the rear wheel for maintenance. Specific application may vary based on bike design.
For tubular frames, use the adjustable support struts. For flat-based frames, remove the support struts and use the flat base of the jack.
The jack lifts from a minimum of 100mm to a maximum of 340mm.
Yes, the base features two mounting plates designed for permanent installation onto table lifts or workstations.
The jack requires some assembly, primarily attaching the handle and potentially the support struts depending on packaging. Refer to the manual for specific instructions.
Please check the manufacturer's website or contact customer support for information on replacement parts.
Check for obstructions around the lifting mechanism. Ensure the load is centered and within the 500kg limit. Lubricate the handle mechanism if necessary.
Verify you are using the correct configuration for your frame type (tubular vs. flat base). Adjust the width and height of the struts for a snug fit on tubular frames. Ensure rubber inlays are present and intact.
Ensure the jack is on a level and solid surface. For permanent installations, check that the mounting bolts are secure. For temporary use, consider using wheel chocks for added safety.
Ensure the jack is fully lowered and not under load. Apply gentle, steady pressure. Clean any debris that might be obstructing the attachment points.
Setup: For tubular frames, position the jack beneath the bike's frame and adjust the support struts to securely engage the frame. Ensure the rubber inlays are in contact. For flat-based frames, remove the adjustable struts and position the jack's base directly under the frame. For permanent installation, use appropriate hardware to secure the two mounting plates to a stable work surface.
Compatibility: Designed for bikes with flat bases or tubular frames. Maximum load capacity is 500kgs. Lifts from 100mm to 340mm.
Care: Keep the jack clean and dry. Regularly inspect the rubber inlays for wear and tear. Lubricate moving parts of the handle mechanism as needed. Ensure all bolts securing the unit (if permanently mounted) are tight.
