Best current price£15.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.99Visit shop B&Q - Grp Stair Nosings Heavy-Duty Anti-Slip Safety TreadNon-Slip Step Edge Protection Brown 1200mm
Visit shop5 offers from £15.99 - £331.19
View price history by clicking the chart icon.
Slips Away GRP Stair Tread Covers are designed for individuals and organizations needing to enhance safety on stairways, particularly in environments prone to wet, oily, or icy conditions. Their key benefit is providing a highly slip-resistant surface, preventing accidents and falls. A potential consideration is their application, which requires proper adhesion and can be a semi-permanent fixture. These covers offer a durable, easy-to-retrofit solution for internal and external high-traffic staircases, featuring integral nosing for improved visibility and compliance with safety regulations.
| Brand | Slips Away |
|---|
GRP stands for Glass Reinforced Plastic, a composite material known for its strength, durability, and resistance to corrosion and chemicals.
Using a suitable industrial-grade adhesive is highly recommended for secure attachment. Mechanical fixings can provide additional security, especially in high-traffic or exposed locations.
While designed for standard steps, they can potentially be adapted for curved or spiral staircases with careful measurement and potentially custom cutting, though this is not their primary intended application.
The lifespan depends on the level of foot traffic, environmental conditions, and maintenance. However, due to their durable GRP construction, they are designed for long-term use in demanding environments.
Yes, the highly slip-resistant surface is engineered to provide grip even on wet, oily, or icy surfaces.
The integral nosing provides a clear visual contrast to the step edge, enhancing safety by making steps more visible, especially in low-light conditions, and helping to prevent trips.
No, these are designed to be retrofitted directly over existing stair surfaces like concrete, steel, or timber, provided the surface is sound, clean, and dry.
Ensure the step surface was thoroughly cleaned, degreased, and dried before application. Verify that the correct type and amount of adhesive were used as per the adhesive manufacturer's instructions. Allow adequate curing time before use.
Clean the tread surface with water and a mild detergent to remove any accumulated dirt, oil, or grime. Avoid abrasive cleaners. Inspect for significant wear and tear.
Ensure the nosing is clean. If fading is severe, consider a touch-up paint suitable for GRP or replacement of the tread. Ensure adequate lighting is present in the area.
This may indicate structural damage or improper installation. Inspect for impact damage. If the issue persists or is widespread, replacement of the affected tread(s) is recommended.
Setup: Ensure the existing step surface is clean, dry, and free from loose debris, oil, or grease. For optimal adhesion, a suitable industrial-grade adhesive (not included) is recommended. Apply adhesive evenly to the back of the tread or the step surface according to the adhesive manufacturer's instructions. Position the tread firmly onto the step, ensuring full contact. For maximum security, mechanical fixings (screws or rivets, not included) can be used in conjunction with adhesive, particularly in very high-traffic or exposed areas. Always follow the adhesive manufacturer's guidelines for curing times before allowing foot traffic.
Compatibility: Slips Away GRP Stair Tread Covers are designed to be retrofitted onto most common step materials including concrete, steel, and timber. They are suitable for a variety of step profiles and sizes, but precise measurement is recommended before purchase.
Care: Regular cleaning with water and mild detergent is recommended to maintain slip resistance. Avoid using harsh solvents or abrasive cleaners that could damage the GRP surface or the anti-slip aggregate. Periodically inspect the treads for any signs of damage or loosening, and re-secure if necessary.
