Best current price£22.59from B&Q
Shopping.co.uk recommended and popular offers
B&Q£22.59Visit shop B&Q - All Plastics Glue 2G + Activator Pen (3 Pack)Strong Adhesive For Difficult PlasticsClear Fast-Drying Diy Repair Glue
Visit shop3 offers from £22.59 - £26.64
View price history by clicking the chart icon.
The Loctite All Plastics Glue 2g + Activator Pen (3 Pack) is for users needing to bond difficult plastics that standard glues cannot handle. Its key benefit is a powerful dual-action system that reliably bonds even low-energy plastics like PE, PP, and PTFE. A potential caveat is that while it sets in seconds, full strength develops over time, requiring patience for heavy-duty applications.
| Colour | White |
|---|---|
| Brand | Loctite |
Yes, the Loctite All Plastics Glue dries clear, making it ideal for neat, invisible repairs on clear plastic items.
While the glue sets in seconds, full bond strength develops over a period of up to 24 hours. Avoid stressing the bond during this time.
The activator is crucial for bonding low-energy plastics like PE, PP, and PTFE. For denser plastics or materials like metal and wood, it may still improve bond speed and strength but is primarily designed for those difficult plastics.
The glue is not recommended for expanded polystyrene (Styrofoam) or foam rubber. It's also not suitable for fabrics or paper.
Store in a cool, dry place away from direct sunlight. Ensure caps are tightly sealed after each use to maintain efficacy.
Yes, the cured adhesive is resistant to water, chemicals, and freezing temperatures, making it suitable for many outdoor applications.
When stored correctly, the glue typically has a shelf life of 1-2 years. The activator pen may dry out faster if not sealed properly. Check the packaging for specific expiration dates.
Ensure you have used the activator pen on at least one of the surfaces. Clean surfaces thoroughly before application and check that the plastic is one of the types listed as compatible (PE, PP, PTFE).
If the glue is dried out, it may be old or exposed to air. If the activator pen is dry, the cap may not have been sealed properly. Both would require replacement of the unit.
Full cure strength takes up to 24 hours. Avoid stressing the bond during this period. Ensure surfaces were properly prepared and the correct application steps were followed.
Do not pull bonded skin apart. Soak in warm, soapy water. Gently peel or roll skin apart using a blunt edge (like a spoon handle). For surfaces, try soaking in warm, soapy water or using a small amount of acetone (nail polish remover) on a cotton swab, testing in an inconspicuous area first.
Setup:
Compatibility:
This adhesive is specifically designed for difficult-to-bond plastics including Polyethylene (PE), Polypropylene (PP), and PTFE. It also bonds well to rubber, metal, wood, and leather. It is not recommended for use on expanded polystyrene (Styrofoam) or foam rubber, and should not be used on fabrics or paper.
Care:
Store the glue and activator pen in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the caps are securely fastened after each use to prevent the glue from drying out and the activator from evaporating. Clean any excess glue from the applicator tip immediately after use. Avoid contact with skin and eyes; use in a well-ventilated area.
