SmartSeal Anti-Condensation Paint - Pale Slate - 5L

The primary benefit is its ability to significantly reduce condensation (up to 95%) and prevent the growth of mould on interior walls.

It is ideal for bathrooms, kitchens, and bedrooms, especially in areas prone to moisture. It's also suitable for walls with poor insulation or cold exterior surfaces.

The wall must be clean, dry, and free from mould, dust, and grease. Any existing mould should be treated and removed before painting.

No, while the paint reduces condensation, adequate room ventilation is still essential for overall moisture control and healthy air quality.

This variant is in a 'Pale Slate' colour.

Two coats are generally recommended for maximum effectiveness in reducing condensation and preventing mould.

It is generally recommended to paint directly onto prepared wall surfaces. Ensure any wallpaper is sound, clean, and dry, or consider removing it for optimal adhesion and performance.

Ensure the surface was thoroughly cleaned, dry, and free from dust or grease before application. Re-prime if necessary.

Ensure all existing mould was completely removed and the surface was treated with a mould killer prior to painting. Check for underlying moisture issues or inadequate ventilation in the room.

Verify that two coats were applied and allowed to dry fully. Consider improving room ventilation as the paint works best in conjunction with good air circulation.

Ensure the paint was applied evenly with consistent pressure from the brush or roller. Stir the paint thoroughly before and during application.