Best current price£7.75from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£7.75Visit shop Deta G3502 Grid Switch 10 Amp 2 Way 5016211135023
Visit shop
B&Q£8.70Visit shop B&Q - G3502 Grid Lighting Switch 10 Amp 2 Way (White)
Visit shop6 offers from £7.75 - £19.75
View price history by clicking the chart icon.
This Deta G3502 Grid Switch is designed for electricians and DIY enthusiasts seeking a versatile and reliable lighting control solution. Its key benefit is the flexibility to function as either a 1-way or 2-way switch, accommodating various wiring setups. A potential caveat is that it requires integration into a Deta grid system for modularity. This 10 Amp switch offers a straightforward way to manage lighting circuits within a customizable grid framework.
| Colour | White |
|---|---|
| Model Part Number | G3502 |
| Brand | Deta |
Yes, the Deta G3502 can be wired as a 1-way switch. It requires a Deta grid plate for mounting.
2-way switching means a single light can be controlled from two different locations, such as at the top and bottom of a staircase.
This switch has three connections for wiring.
The switch is rated for 10 Amps, which is suitable for most standard domestic lighting circuits.
This switch is a module for the Deta grid system, which typically uses a specific grid mounting frame installed into a standard back box.
Please refer to the retailer or Deta for specific warranty information, as it typically varies.
Ensure the circuit breaker is on and the wiring connections are secure. Verify the switch is correctly configured for 1-way or 2-way operation.
Check the wiring for a 2-way configuration. Ensure the 'common' terminal is correctly identified and wired.
Confirm the switch module is securely clipped into the Deta grid frame and the frame is properly mounted to the wall box.
Setup: The Deta G3502 Grid Switch is designed to be installed into a Deta grid mounting frame. Ensure the power supply to the circuit is turned off at the mains before commencing installation. Connect the wires according to the wiring diagram for either 1-way or 2-way configuration. It is recommended that installation is carried out by a qualified electrician.
Compatibility: This switch module is compatible with Deta grid plates and other Deta grid system components. It is not designed for use in standard single-gang or multi-gang faceplates without a Deta grid frame.
Care: To clean the switch, disconnect power and wipe gently with a dry or slightly damp soft cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.
