Best current price£22.99from GhostBikes.com
Shopping.co.uk recommended and popular offers
GhostBikes.com£22.99Visit shop Apico Bar End Punch Api - Handle Bar Grip End Cutter Kit 22.5Mm & 25.4Mm (7/8" & 1")
Visit shop1 offer from £22.99
View price history by clicking the chart icon.
This guide is for motorcycle riders looking to cleanly install aftermarket aluminum bar ends on their handlebars. The Apico Handle Bar Grip End Cutter Kit provides a simple and effective way to achieve a professional finish when modifying handlebar grips. A minor caveat is that precise measurement and steady hand are still required for the best results.
| Model Part Number | BAR END PUNCH API |
|---|---|
| Brand | Apico |
This kit is designed to help motorcycle riders cleanly cut the ends of their handlebar grips to properly fit aftermarket aluminium bar ends, ensuring a neat and professional finish.
The kit includes a 22.5mm cutter for the left-hand grip and a 25.4mm cutter for the right-hand grip (throttle side).
While optimized for Apico Aluminium bar ends, the cutters can be used to prepare grips for most aftermarket bar ends that require a section of the grip to be removed. Always check the compatibility requirements of your specific bar ends.
Align the correct size cutter precisely with the end of the grip, ensuring it is centered. Apply firm, steady pressure in a circular or downward motion to cut through the grip material.
For exceptionally tough grip materials, you might need to start the cut with a sharp utility knife before using the cutter tool for a cleaner finish.
Wipe the cutters clean after each use to remove residue and store them in a dry place to prevent rust. Ensure the cutting edges remain sharp and free of debris.
No, the tool is designed for simplicity. With proper alignment and steady pressure, it makes cutting grips a straightforward task for most users.
Ensure the cutter is aligned correctly and apply firm, consistent pressure. Check that the grip is not excessively thick or made of a material that resists cutting. You may need to make a second, partial rotation if the first pass was not complete.
Verify you are using the correct size cutter for the side (22.5mm left, 25.4mm right). Some grips may have slightly different outer diameters; ensure the cutter is centered and apply pressure evenly.
Ensure the cutting edge is free of debris or damage. Re-center the cutter on the grip and apply steady downward pressure. If the grip material is extremely hard, a utility knife may be needed to start the cut before using the cutter.
Setup: The cutters are designed for direct use. Ensure the grip is fully seated on the handlebar. Select the appropriate cutter for the left (22.5mm) or right (25.4mm) side. Place the cutter over the end of the grip, aligning it carefully with the handlebar end. Apply firm, even pressure to cut through the grip material.
Compatibility: This kit is specifically designed for use with Apico Aluminium bar ends. However, the cutters can be used on most standard motorcycle handlebars to prepare grips for *any* brand of bar end that requires a portion of the grip to be removed. Always verify the internal diameter requirements of your chosen bar ends.
Care: After use, wipe the cutters clean with a dry cloth to remove any grip residue. Store in a dry place to prevent rust. Periodically check the cutting edges for any debris and clean if necessary. Avoid dropping the cutters, as this could damage the blades.
