Schneider Electric Vario Load Breaker - V0
Best current price£24.14from Tameson UK
Best offers
Shopping.co.uk recommended and popular offers
Tameson UK£24.14Visit shop Schneider Electric Vario Disconnector - V0
Visit shopTameson UK£24.14Visit shop All Offers
3 offers from £24.14 - £128.05
View price history by clicking the chart icon.
TeSys VARIO Main Disconnect Switch 25A 3P V0£13.20 delivery£128.05Visit shop →
Product Information
Full details
The Schneider Electric Vario Load Breaker - V0 is a 3-pole safety switch designed for electrical installations requiring reliable circuit isolation. It's ideal for industrial and commercial applications needing to safely disconnect power, with a key benefit being its robust construction and 690V operating voltage. A potential consideration is its IP20 rating, meaning it's protected against solid objects larger than 12.5mm but not against water ingress, making it unsuitable for wet environments without additional protection. Key features include a 25A rated continuous current, screw connections, and suitability for ground mounting.
All features
| Series | Vario |
|---|---|
| Model Part Number | V0 |
| Brand | Schneider Electric |
Extended Product Information
FAQs
What is the maximum voltage this load breaker can handle?
The maximum rated operating voltage (Ue) for this load breaker is 690V.
What is the continuous current rating?
The rated continuous current (Iu) is 25A. For AC-23 loads at 400V, the rating is 14.5A, and for AC-21 loads at 400V, it is 25A.
Is this breaker suitable for outdoor use?
No, the Vario Load Breaker V0 has an IP20 rating, meaning it is not protected against water. It must be installed in a dry environment or within an appropriate enclosure.
How do I connect the wires?
The breaker features screw connections for the main circuit wiring. Ensure wires are properly stripped and securely fastened with the appropriate torque.
What type of mounting is supported?
This load breaker is designed for fixed built-in installation and is suitable for ground mounting.
What does '3-pole' mean in this context?
A 3-pole breaker is designed to interrupt all three conductors of a three-phase electrical supply simultaneously, providing complete isolation.
Can this breaker be used for frequent switching operations?
The breaker is rated for AC-21 and AC-23 applications. For applications requiring very frequent switching, consult the Schneider Electric Vario series documentation or a qualified electrician for suitability.
Troubleshooting
Breaker fails to switch ON/OFF
Ensure the operating mechanism is not obstructed and that the internal contacts are clean. Verify correct installation and wiring.
Overheating at terminals
Check screw terminal tightness. Ensure the connected cable gauge is appropriate for the current rating. Verify the load does not exceed the AC-23 rating if applicable.
Visible damage to casing
Do not use the device. Replace immediately with a new unit to maintain safety standards.
Device does not isolate power effectively
Confirm the breaker is correctly installed in series with the load and that the load is fully de-energized when the switch is in the OFF position. If the issue persists, the unit may be faulty and require replacement.
Pros and Cons
Pros
- High rated operating voltage (690V) for versatile use in demanding environments.
- Robust 25A continuous current rating suitable for moderate to heavy loads.
- Secure screw connections for reliable electrical contact.
- Designed for safe circuit isolation in industrial and commercial settings.
- Part of the established Vario Series from Schneider Electric.
Cons
- IP20 rating offers limited protection against moisture and dust, requiring a dry environment or additional enclosure.
- Primarily designed for fixed installation, lacking portability.
- Specific AC-23 current rating (14.5A) is lower than the continuous rating, requiring careful load calculation.
- Installation may require specialized electrical knowledge due to its function.
Setup, Compatibility & Care
Setup:
- Ensure the power supply to the intended circuit is completely de-energized.
- Mount the load breaker securely using the built-in technique, preferably in a grounded position as intended.
- Connect the main circuit wiring to the screw terminals, ensuring proper torque is applied according to electrical standards.
- Verify all connections are tight and correctly phased.
Compatibility:
- Designed for use within electrical systems with operating voltages up to 690V.
- Suitable for 3-phase circuits.
- Part of the Schneider Electric Vario Series.
Care:
- Keep the device in a clean, dry environment due to its IP20 rating.
- Periodically inspect connections for tightness and signs of wear.
- Avoid cleaning with liquids; use a dry cloth to remove dust.