Best current price£60.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£60.00Visit shop Godox Xpro-Sony Ttl 2.4G Wireless High Speed Sync 1/8000 Second Radio Flash Strobe Trigger 5060198245015
Visit shop2 offers from £60.00
View price history by clicking the chart icon.
The Godox XPro-N Nikon TTL Wireless Trigger is designed for Nikon photographers seeking advanced wireless flash control. Its key benefit is seamless TTL integration and High Speed Sync (HSS) up to 1/8000s for versatile shooting scenarios. A potential caveat is its reliance on the Godox wireless system, requiring compatible Godox flashes for full functionality. This trigger offers a robust 2.4G wireless system with a large LCD, extensive group/channel options, and a 100m range, simplifying complex lighting setups.
| Brand | Godox |
|---|
The XPro-N is specifically designed for Nikon DSLR and mirrorless cameras that have a standard hot shoe mount.
If you are using Godox flashes that have a built-in Godox 2.4G Wireless X System receiver (like the Godox AD series or TT685N), you do not need an external receiver. For older Godox flashes or other brand flashes, you will need a Godox X system receiver (e.g., XTR-16).
The Godox XPro-N supports High Speed Sync up to 1/8000s.
The XPro-N has dedicated group buttons (A, B, C, D, E) for quick access and adjustment of flash power or settings within those groups.
No, the XPro-N is Nikon-specific. Godox offers different versions of the XPro trigger for Canon (XPro-C) and Sony (XPro-S) cameras.
The wireless trigger has a range of up to 100 meters (approximately 328 feet).
The Godox XPro-N typically uses 2x AA batteries.
Ensure the trigger and flashes are powered on, set to the same channel and group, and within wireless range. Check that the Godox X system receiver is properly attached to non-Godox flashes if applicable.
Verify that both the camera and trigger are set to TTL mode. Check for any flash exposure compensation settings on the camera or trigger and adjust as needed. Ensure clear line of sight between the trigger and receiver.
Confirm that HSS is enabled on the trigger and that your camera's shutter speed is set above the flash sync speed (usually 1/200s or 1/250s) but below the HSS limit (1/8000s). Ensure your flash is also capable of HSS.
Check the battery level in the trigger. If the issue persists, contact customer support.
Setup:
Compatibility:
Care:
