Best current price£9.15from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.15Visit shop B&Q - Solid Rubber Sanding Block Wet And Dry Rubbing And Flattering 125mm X 65mm
Visit shop2 offers from £9.15
View price history by clicking the chart icon.
The AB Tools Solid Rubber Sanding Block (TE560) is an essential tool for professional contractors and DIY enthusiasts who require a consistent, flat surface for manual sanding tasks. Its primary benefit is the secure metal-spike locking system, which prevents paper slippage during intensive sanding, though users should note it is designed primarily for standard sheet sizes and may require trimming for non-standard paper widths.
| Model Part Number | TE560 |
|---|---|
| Brand | AB Tools |
Yes, the solid rubber construction is rust-resistant and ideal for wet sanding tasks, provided you dry it thoroughly after use.
The block measures 125mm x 65mm.
No, it is designed to work with standard sheets of wet or dry sandpaper that can be cut to fit the block's dimensions.
The block is designed to be rigid to ensure a flat surface, though it has enough inherent material properties to prevent surface scratching.
Simply lift the edge flaps to release the tension on the sandpaper and slide the paper out from the spikes.
Ensure the paper is pulled taut across the face of the block and that the locking flaps are pressed down firmly enough to allow the spikes to fully penetrate the paper backing.
Check the spike area for buildup of sanding dust or dried plaster. Use a stiff brush to clean the spike area and ensure the paper backing is thick enough for the spikes to engage.
Setup is straightforward: position your sandpaper sheet onto the base, ensuring it wraps around the sides into the slots. Press the spring-loaded or pressure-fit flaps down firmly to lock the paper into the internal spikes. This block is compatible with most standard wet and dry sandpaper sheets. To care for your tool, regularly brush away accumulated dust from the base and ensure it is stored in a dry place to maintain the integrity of the metal spikes. If you have been performing wet sanding, ensure the block is thoroughly dried before storage to prevent debris from hardening inside the spike mechanism.
