Soho Lighting Bronze & Brushed Brass 1 Gang 2-Way Intelligent Dimmer 150W LED

Soft-start technology gradually increases the light output over 1-2 seconds when you turn the lights on. This is gentler on the light bulbs, potentially extending their lifespan, and provides a smoother transition.

No, you must use dimmable LED bulbs. Non-dimmable LED bulbs are not compatible and may not work or could damage the dimmer.

Most modern dimmable LEDs work best on trailing edge, while older halogen/incandescent bulbs often use leading edge. The dimmer has a simple button setup to switch between these modes. If you experience flickering or poor performance, try changing the mode.

The maximum load for dimmable LED bulbs is 150W.

The maximum load for dimmable Halogen or Incandescent bulbs is 300W.

Yes, this dimmer is designed for 2-way switching, allowing you to control the lights from two different locations (e.g., at the top and bottom of stairs).

Use a soft, dry cloth for cleaning. Avoid abrasive cleaners or chemicals that could damage the hand-finished appearance.

Check that the power supply is on at the mains and that the wiring connections are secure. Verify the fuse hasn't tripped.

Ensure you are using dimmable bulbs. Try switching the edge mode (leading/trailing) using the setup button. Check that the bulb wattage is within the specified limits (150W LED / 300W Halogen/Incandescent).

Slight warmth during use is normal, especially under maximum load. If the dimmer becomes excessively hot, turn off the power immediately and check for loose connections or an overload condition.

Verify power supply. Ensure no obstructions are preventing operation. If the issue persists, reset the dimmer by turning off power for 30 seconds and turning it back on.