Best current price£3.29from UK Office Direct
Shopping.co.uk recommended and popular offers
UK Office Direct£3.29Visit shop Safety Sign Fire Exit Running Man Arrow Down/Left Self-Adhesive
Visit shop
B&Q£9.49Visit shop B&Q - Signslab E97S/s Safety Sign "fire Exit Running Man ArrowDown/left"Self-Adhesive150 mm X 450 mm
Visit shop4 offers from £3.29 - £9.49
View price history by clicking the chart icon.
The Soundlab Fire Exit Running Man Arrow Sign is designed for safety officers, facility managers, and business owners who need to ensure clear, code-compliant emergency egress identification in commercial or public spaces. This sign offers the benefit of high visibility during critical situations, ensuring occupants can quickly locate escape routes; however, it requires a smooth, clean surface for the self-adhesive backing to maintain a long-term, secure hold.
| Brand | Soundlab |
|---|
The self-adhesive backing is designed for smooth, flat surfaces. A brick wall is likely too textured for the adhesive to bond properly, and you may need mechanical fasteners or a mounting board.
This specific model is a standard high-visibility sign and does not feature glow-in-the-dark properties. Ensure it is placed in an area with adequate emergency lighting.
Gently heat the sign with a hairdryer to soften the adhesive, then slowly peel it back at an angle. Any remaining residue can be removed with a mild adhesive remover.
The sign is designed primarily for indoor use. Exposure to direct sunlight, moisture, and extreme temperature fluctuations may reduce the lifespan of the adhesive and the material.
The 150 mm x 450 mm size is a common standard, but always verify local fire safety regulations for your specific building type to ensure compliance with minimum size requirements.
Ensure the surface was cleaned of dust or grease before application; if the wall is textured, consider using additional industrial-grade double-sided tape.
Use a plastic squeegee or a soft cloth to smooth the sign from the center outward toward the edges immediately after application.
To install, ensure the target surface is dry, flat, and free from contaminants. Peel the protective backing film away and press the sign firmly against the wall, applying even pressure across the entire surface to ensure the adhesive bonds fully. To maintain the sign, periodically wipe the surface with a soft, damp cloth to remove any accumulated dust or grime. Avoid using abrasive sponges or harsh chemical solvents, as these may damage the sign's finish or degrade the ink quality over time.
