Best current price£35.99from eBay
Shopping.co.uk recommended and popular offers
eBay£35.99Visit shop 4x Bartoline Ready Mixed Lightweight Filler No Shrinkage Cracking Quick-Dry 1L
Visit shop
B&Q£47.99Visit shop B&Q - 4X Ready Mixed Lightweight Filler No Shrinkage Cracking Quick-Dry 1L
Visit shop3 offers from £35.99 - £49.99
View price history by clicking the chart icon.
The Bartoline Lightweight Filler in White is designed for homeowners and DIY enthusiasts seeking a high-tech, ready-to-use solution for interior and exterior filling tasks. Its key benefit is its ultra-modern glass bead technology, which allows for deep fills without sagging or shrinkage, even on ceilings, and dries to a smooth, brilliant white finish that requires no sanding and can be overpainted in just 30 minutes. A key caveat is its unsuitability for use on plastics and metals, and it must be protected from rain during setting when used externally.
| Colour | White |
|---|---|
| Model Part Number | LF1000 |
| Brand | Bartoline |
Yes, this filler is suitable for use on wood for interior and exterior applications.
The filler can be overpainted in approximately 30 minutes. Full drying time will vary depending on the depth of the fill and ambient conditions.
No, the product dries to a perfectly smooth finish that typically requires no sanding. However, it can be sanded if required.
Yes, it is suitable for exterior use, but it must be protected from rain during setting and sealed with an oil-based paint to protect from weathering afterwards.
This filler is not suitable for use on plastics or metals.
Replace the lid firmly and store in a cool, dry place, not below 5°C. Protect from frost.
Add a single drop of water to the product and mix thoroughly. Be careful not to add too much water.
Add a single drop of water to the product and mix thoroughly. Avoid adding too much water.
This filler is designed not to sag or shrink. Ensure it is pressed firmly into the cavity and smoothed over. For exceptionally deep areas, multiple thin layers might still be considered if application issues persist, though not typically necessary.
Ensure the surface is properly prepared (clean, dry, dust-free) and that the filler was pressed firmly into the cavity. Avoid applying in temperatures below 5°C.
Ensure the filler is completely dry (allow at least 30 minutes, longer in damp conditions). If a perfectly smooth finish was not achieved, light sanding might be required before painting.
Preparation:
Ensure surfaces are clean, dry, and dust-free before application.
Application:
Use directly from the tub with a filler tool or spatula. If the product appears too dry, add a single drop of water. Press firmly into cavities and smooth over the surface. Allow to dry completely.
Drying & Overpainting:
Dries in approximately 30 minutes and can be overpainted thereafter.
External Use:
When used externally, protect the filled area from rain and water during the setting process. After setting, seal the filled area with an oil-based paint to protect it from weathering. Do not use externally if rain is imminent. Ensure ambient temperatures are above 5°C.
Compatibility:
Suitable for interior or exterior use on all surfaces except plastics and metals. Not suitable for fixing structural bolts.
Care and Storage:
Clean tools immediately with water after use. Replace the lid firmly after use. Store in a cool, dry place, ensuring the temperature does not drop below 5°C. Protect from frost.
