Shopping.co.uk

Proxxon Engraving Tool - 12V DC

Proxxon Engraving Tool - 12V DC

The Proxxon GG 12 engraving tool is a 12V DC corded tool designed for engraving and line work. It ...

Best current price£19.49from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £19.49 - £22.31

View price history by clicking the chart icon.

eBayPROXXON Engraving Tool GG12 12-Volt 28592
Free delivery in 1–3 days
£19.49
Visit shop

Product Information

Full details

The Proxxon GG 12 engraving tool is ideal for hobbyists and professionals who need precision engraving on various materials like glass, metal, wood, and plastic. This tool provides exceptional control and allows for fine detail work, enhancing your creative projects. Note that it requires a separate PROXXON mains adaptor for operation.

All features

Model Part Number28592
BrandProxxon

Extended Product Information

FAQs

What power supply is required?

The Proxxon GG 12 requires a PROXXON mains adaptor (12-18V) or another power supply unit that provides the correct voltage and a minimum of 0.5A.

What materials can I engrave?

You can engrave on glass, metal, wood, and plastic.

What is the speed of the tool?

The tool operates at 20,000 RPM.

What accessories are compatible?

The shaft holder accepts accessories with a Ø 3/32" (2.35mm) shaft.

How do I change the engraving bit?

Use the push in/pull out shaft holder.

How do I clean the tool?

Clean the tool and engraving bit after each use using a soft brush or cloth. Store it in a clean, dry place.

Where is the tool made?

The Proxxon GG 12 is made in China.

Is there a warranty?

Contact your retailer for warranty information.

Troubleshooting

The tool does not turn on.

Check the power supply connection and ensure it is properly connected to both the tool and the power outlet. Verify that the power supply is functioning correctly. Check the switch for good contact.

The engraving quality is poor.

Ensure the engraving bit is sharp and in good condition. Adjust the speed and pressure during engraving. Practice on a sample material before working on your final piece.

The tool vibrates excessively.

Check the engraving bit for damage or wear. Ensure the bit is securely fastened in the shaft holder. Reduce the engraving speed and pressure.

Pros and Cons

Pros

  • High precision engraving capabilities.
  • Lightweight and ergonomic design for comfortable use.
  • Versatile for various materials.
  • Easy accessory changes
  • High speed for fine detail work.

Cons

  • Requires a separate power supply unit (PROXXON mains adaptor).
  • May require practice to master detailed engraving.
  • Shaft holder only fits Ø 2.35mm accessories

Setup, Compatibility & Care

  1. Power Supply: Connect the Proxxon GG 12 to a PROXXON mains adaptor (12-18V) or a compatible power supply unit with a minimum capacity of 0.5A. Ensure the power supply is properly connected to a power outlet.
  2. Accessory Installation: Insert the desired engraving bit into the shaft holder. The shaft holder is Ø 3/32" (2.35mm). Ensure the bit is securely fastened.
  3. Material Preparation: Ensure the surface of the material is clean and free of debris before engraving. Consider using tape to mark your design before engraving for accuracy.
  4. Engraving Process: Hold the tool like a pen and gently apply pressure while guiding it along your design. Start with light pressure and gradually increase as needed.
  5. Care and Maintenance: After each use, clean the tool and the engraving bit using a soft brush or cloth. Store the tool in a clean, dry place to prevent damage. Always unplug the power supply when not in use.

Compatibility

The Proxxon GG 12 is compatible with PROXXON mains adaptors (12-18V) and other power supply units that meet the voltage and amperage requirements. Ensure the power supply provides a stable current for optimal performance. Use only accessories with a 2.35mm shaft.

Price History

DatePrice
Visit shop