Forest Garden Heritage Traditional Overlap Dip Treated Timber Fence Panel - Brown

Dip-treated timber has been dipped in a wood preservative, offering basic protection. Pressure-treated timber has the preservative forced deep into the wood under pressure, providing a more robust and longer-lasting defence against rot and insect attack.

It is generally recommended to reapply a quality exterior wood preservative or stain annually, or as per the manufacturer's instructions, to maintain optimal protection, especially for dip-treated timber.

Yes, after ensuring the panel is clean and dry, you can apply a good quality exterior paint or wood stain over the existing finish to further protect the timber and enhance its appearance.

For optimal stability, fence posts should typically be placed at intervals of no more than 1.8m (6ft). Ensure posts are set securely in the ground.

This guide does not specify if fixings are included. You will typically need to purchase suitable brackets, screws, or nails separately based on your chosen installation method.

Using a gravel board at the base of the fence panel is highly recommended. This acts as a barrier between the timber and the ground, preventing moisture absorption and extending the panel's life.

Timber can naturally expand and contract with moisture changes. Ensure the panel is securely fixed to the posts to minimize movement. Allow for slight natural movement during installation.

This can occur if the dip treatment has worn off or if the panel is in constant contact with damp soil. Ensure proper application of a suitable wood preservative and consider using gravel boards to keep the panel off the ground.

Check the stability of the fence posts. If posts are loose or rotten, they may need to be replaced or reinforced. Ensure panels are securely fastened to the posts.