DJI PROSSD Mount - CP.RN.00000190.01
Best current price£149.00from DJI UK
Best offers
Shopping.co.uk recommended and popular offers
DJI UK£149.00Visit shop Dji Prossd Mount
Visit shopDJI UK£149.00Visit shop One Offer
1 offer from £149.00
View price history by clicking the chart icon.
Product Information
Full details
The DJI PROSSD Mount is an essential accessory for professional videographers using the DJI Ronin 4D system who require high-capacity, reliable storage for high-resolution 8K recording. It provides a secure, low-profile interface to mount the DJI PROSSD 1TB directly to your camera, ensuring data integrity during rigorous cinematography work. While it significantly enhances workflow capabilities, it is specifically engineered for this proprietary ecosystem and is not compatible with other camera brands or non-DJI storage modules.
All features
| Model Part Number | CP.RN.00000190.01 |
|---|---|
| Brand | DJI |
Extended Product Information
FAQs
Can I use a third-party SSD with this mount?
No, this mount is designed specifically to interface with the DJI PROSSD 1TB to ensure performance and reliability.
Does the mount require an external cable?
No, it is a direct-attach mount, which helps minimize signal interference and cable failure.
Can I record 8K without this mount?
To record 8K resolution at the required bitrates on the Ronin 4D, the PROSSD 1TB via this mount is typically required.
Are the mounting screws standard size?
The kit includes M2-20 hex cap screws; it is recommended to use the hardware provided to ensure proper depth and tension.
Is this compatible with the Ronin-S or Ronin-2?
No, this mount is exclusive to the DJI Ronin 4D ecosystem.
Troubleshooting
Camera does not recognize the SSD
Ensure the mount is firmly attached and the SSD is fully seated. Check for any dust or debris on the contact pins.
SSD connection feels loose
Verify that the two M2-20 hex cap screws are fully tightened using the provided 1.5mm ball-end hex key.
Pros and Cons
Pros
- Seamless integration with DJI Ronin 4D firmware and hardware
- Essential for high-bitrate 8K internal recording
- Durable, lightweight construction in professional black finish
- Includes all necessary tools for immediate setup
Cons
- Compatible exclusively with the DJI Ronin 4D system
- Requires proprietary DJI PROSSD 1TB drive
- Installation requires manual use of hex key rather than tool-less design
Setup, Compatibility & Care
To install the mount, align the SSD with the designated interface on your Ronin 4D. Using the included 1.5mm ball-end hex key, insert the two M2-20 hex cap screws through the mount into the camera body. Tighten until snug, but avoid overtightening to prevent stripping the threads.
Compatibility: This product is designed specifically for the DJI Ronin 4D. It is not intended for use with other gimbals or mirrorless camera systems.
Care: Periodically check the mounting screws before each shoot to ensure they have not loosened due to gimbal vibrations. If the unit collects dust or debris, wipe the exterior with a dry microfiber cloth and use a gentle air blower on the electrical contact points. Do not use liquids or chemical cleaners near the contact pins.