CarPlan Demon Foam Snow Foam & Car Shampoo - CDW200

Yes, while a pressure washer can enhance the foaming action with the included gun, the product can also be used by diluting it in a bucket of warm water and washing with a sponge or brush as described in the instructions.

The product is designed for all exterior surfaces and paintwork. However, it's always recommended to test on an inconspicuous area first, especially for specialized finishes like matte paint.

For a standard bucket wash, use approximately 50ml of shampoo per bucket of warm water. The included 2L bottle provides multiple washes.

The included gun is designed for general use with a water source. For optimal foaming with a pressure washer, refer to the gun's specific instructions if available, or ensure a suitable water flow and pressure.

The instructions focus on applying the foam and then washing. It's generally advisable not to let the foam dry completely on the surface, especially in warm conditions. Wash within a few minutes of application.

The 1L CarPlan Foam refill (CDW101) is provided to ensure you have a sufficient supply of the snow foam for continued use after the initial 2L bottle is depleted.

It is not recommended to mix this product with other car cleaning chemicals, as it may affect performance or cause unintended reactions. Use as directed.

Ensure the correct dilution ratio is used (50ml per bucket) and that warm water is used for the wash solution. Check the foam gun for blockages and ensure it is properly connected to the water source.

Ensure the vehicle is thoroughly rinsed with clean water before drying. Dry the vehicle immediately after rinsing with a clean chamois or microfibre cloth to prevent water spots.

For heavily soiled vehicles, pre-rinse with a pressure washer to remove loose debris. Allow the foam to dwell for a short period (as per instructions) before washing to maximize dirt suspension. Consider a more intensive wash if dirt is deeply ingrained.