EverNary Door Window Pool Alarm with Remote Control - 2Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The EverNary Wireless Magnetic Sensor Door Alarm is an ideal security solution for homeowners, renters, and parents looking to monitor entry points or pool access without complex wiring. By emitting a piercing 130dB alert upon triggering, it provides an immediate deterrent and notification for unauthorized entry or accidental door openings. While the system is highly effective for standard residential use, it is important to note that the magnetic sensors require precise alignment on flat surfaces to function reliably and may not be suitable for doors with significant gaps exceeding 0.6 inches.
All features
| Model Part Number | VD01 5-2 |
|---|---|
| Brand | EverNary |
Extended Product Information
FAQs
Can I use this on a sliding door?
Yes, as long as the gap between the sliding panel and the frame is 0.6 inches or less when the door is closed.
Does this require a Wi-Fi connection?
No, this is a standalone wireless system that operates via magnetic sensors and radio frequency remotes; it does not require internet.
How many remotes can I pair with one unit?
The system is designed to function with the included remote; check the manual if you are looking to purchase additional compatible remotes.
Is the alarm weather-resistant?
The unit is designed for indoor use or sheltered areas; avoid exposing it to direct rain or extreme moisture.
What type of batteries does it use?
The unit includes the necessary batteries for operation; please refer to the battery compartment labeling for exact replacements when needed.
Can I adjust the volume of the alarm?
The alarm is preset to 130dB to ensure maximum security effectiveness and does not feature a variable volume setting.
Troubleshooting
The alarm does not sound when the door is opened.
Verify that the magnetic sensor and the alarm unit are within 0.6 inches of each other when the door is closed, and ensure the battery is not depleted.
The unit emits a faint beeping sound periodically.
This indicates the battery voltage has fallen below 2.1v; please replace the batteries immediately.
The remote control is not responding.
Ensure you are within the 50-foot operating range and check that there are no major obstructions like thick concrete walls between the remote and the sensor.
Pros and Cons
Pros
- Extremely loud 130dB alarm for maximum deterrent effect
- Easy peel-and-stick installation suitable for renters
- Convenient remote control functionality
- Includes batteries for immediate use
- Proactive low-battery indicator prevents sudden dead zones
Cons
- Strict requirement for door gaps of 0.6 inches or less
- Performance depends on precise sensor alignment
- Remote control range is limited to 50 feet
- Not suitable for uneven or non-flat door frames
Setup, Compatibility & Care
Before mounting, ensure the surface area is clean, dry, and free of dust to ensure the adhesive tape bonds securely. Align the two components so the arrows on the side of the units match when the door is closed. Test the alignment by slowly opening the door until the alarm triggers; this helps you understand the exact clearance distance. Because this system relies on magnetic contact, avoid placing large metal objects directly behind the mounting area as this can interfere with the sensor signal. To care for the unit, wipe down the exterior with a dry cloth periodically and change the batteries promptly when you hear the low-voltage beep to ensure consistent coverage.