Best current price£365.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£365.00Visit shop Britwall Brick Pattern Matte Finish Shower Panel Light Grey 2400 X 1000 X 10Mm 3 Pack
Visit shop3 offers from £365.00
View price history by clicking the chart icon.
This Ener-J Britwall shower panel is designed for homeowners and renovators seeking a modern, low-maintenance alternative to traditional bathroom tiles. Its key benefit is a quick, grout-free installation process that results in a waterproof and durable surface. A potential caveat to consider is the specific brick-effect design, which may not suit all aesthetic preferences. The panel features a light grey matt finish with a subtle brick pattern, offering a stylish, textured look for showers, wet rooms, and feature walls in both homes and commercial spaces.
| Model Part Number | BRITWALL |
|---|---|
| Brand | ENER-J |
The Britwall panels are designed for wall applications. Ceiling installation would require specific structural considerations and may not be recommended by the manufacturer. Please consult installation guidelines.
Yes, it is possible to install over existing tiles, provided the original tiles are sound, well-adhered, and the surface is thoroughly cleaned and degreased. The wall must be completely flat. You may need a stronger adhesive.
Use a soft, damp cloth with a mild, non-abrasive detergent. Rinse thoroughly with clean water and dry with a soft cloth to avoid water spots.
This depends on the dimensions of your shower enclosure. Measure the height and width of the walls you intend to cover and divide by the panel dimensions (2400x1000mm), accounting for any necessary cuts and wastage.
The panel features a printed brick-effect pattern with a matt finish, providing visual depth and a subtle tactile quality. It is not a deep, dimensional brick structure.
Each Ener-J Britwall shower panel weighs 11.5kg.
Yes, the durable, waterproof, and flameproof nature of the panels makes them suitable for commercial interiors like washrooms, changing rooms, or hospitality settings.
Ensure the wall surface is completely dry, clean, and free from dust or grease. Use the recommended adhesive and apply it evenly according to the product instructions. Ensure sufficient pressure is applied during fitting and allow adequate curing time.
Verify that appropriate sealant has been used at all edges, corners, and joints. Ensure all cut edges are properly sealed. Reapply sealant if it appears damaged or insufficient.
This may be due to residue from cleaning products. Try cleaning with a mild detergent and water. Avoid abrasive cleaners. If the issue persists, check the product manual for specific cleaning recommendations.
Use a fine-toothed saw or a sharp utility knife specifically designed for cutting plastic sheeting. Measure and mark cuts carefully. Support the panel well during cutting to prevent chipping or cracking.
Setup: Ensure the wall substrate is clean, dry, and structurally sound before installation. Panels can be cut to size using appropriate tools for PVC. Adhere to manufacturer guidelines for the recommended adhesive and sealing methods to ensure a watertight finish. Panels are typically fitted using a suitable adhesive and can be mechanically fastened if required by the specific installation area.
Compatibility: Suitable for installation on most rigid wall surfaces including plasterboard, existing tiles (with proper preparation), or concrete. Designed for use in wet areas such as showers, bathrooms, and wet rooms. Ensure adequate ventilation in the room as per standard building regulations.
Care: Clean the surface regularly with a soft, damp cloth and mild, non-abrasive detergent. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the matt finish. Rinse with clean water and dry with a soft cloth. Regularly check seals around the edges and corners to maintain waterproofing.
