Best current price£9.49from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.49Visit shop B&Q - 8M / 26Ft X 25mm Tape MeasureTough Impact Resistant Abs Case
Visit shop2 offers from £9.49 - £24.16
View price history by clicking the chart icon.
The Tolsen Yellow Door Lock Installation Kit is designed for DIY enthusiasts and professionals alike looking to simplify the process of installing deadbolts and locksets on wooden doors. Its primary benefit is ensuring perfectly aligned holes with minimal effort, which can be challenging for users without specialized tools. A minor caveat is its specific suitability for wooden doors within a certain thickness range.
| Brand | Tolsen |
|---|
This kit is specifically designed for internal wooden doors with a thickness between 35mm and 45mm (1-3/8" to 1-3/4"). It is not recommended for metal, glass, or composite doors.
No, the Tolsen Yellow Door Lock Installation Kit requires a separate power drill. The kit includes the hole saws, arbor, and positioning frame.
The yellow ABS positioning frame acts as a guide for your drill. Ensure the frame is securely clamped to the door edge before drilling, and maintain a steady, perpendicular angle with your drill.
The kit includes two hole saws: one 25mm (1”) for the lock body and one 54mm (2-1/8”) for the deadbolt or passage hole.
While it can be used on wooden exterior doors, it's primarily intended for internal doors. Ensure any exterior wood is properly sealed after installation to protect against weather.
Using the wrong size hole saw will result in a lock that either doesn't fit or is loose. Always refer to the lock manufacturer's template or specifications to determine the correct hole saw size needed.
The yellow ABS positioning frame uses an adjustable clamping mechanism to secure itself to the edge of the door. It's designed to fit doors within the specified thickness range.
Ensure the drill is set to the correct speed (usually medium speed for hole saws) and apply steady, even pressure. Check if the hole saw teeth are sharp and free from debris.
Verify the door thickness is within the 35-45mm range. Ensure the frame's clamping mechanism is fully engaged.
Confirm the hole saw is securely attached to the arbor and the arbor is properly inserted into the drill chuck. Ensure the positioning frame is firmly clamped to the door.
Double-check that the correct size hole saw was used for each part of the lock. Ensure holes were drilled straight and centered according to the lock manufacturer's template.
Setup:
Compatibility:
Care:
