4Pc 10Mm Heavy Duty Closed Hook Eye Bolt Rawl Shield Wall Anchor Expansion Bolts - Amtech - Silver
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone needing to securely fasten items to solid surfaces like concrete or brick using the Amtech 10mm Heavy Duty Closed Hook Eye Bolt. The primary benefit is providing a strong, reliable anchor point. However, these bolts are *not* suitable for applications requiring building code approval. This guide covers the features, uses, and care of these heavy-duty expansion bolts.
All features
| Colour | Silver |
|---|---|
| Model Part Number | S5970 |
| Brand | Amtech |
Extended Product Information
FAQs
What size hole is required for the Amtech 10mm bolt?
A 16mm hole is required for the expansion bolt.
What tools are needed for installation?
You will need a 16mm drill bit and a 16mm spanner.
What materials can these bolts be used with?
These bolts can be used with masonry, concrete, brick, block, and stone.
Are these bolts suitable for applications requiring building code approval?
No, these bolts are not suitable for applications requiring building inspector or local authority approval.
What is the internal eye diameter of the hook?
The internal eye diameter is 30mm.
How do I maintain the bolts?
Regularly inspect for corrosion or damage and replace if necessary.
What is the thread size of the bolt?
The thread size is M10.
Troubleshooting
Bolt doesn't seem to be gripping securely.
Ensure the hole is the correct size (16mm) and the bolt is fully inserted. Tighten the expansion nut firmly with a 16mm spanner. Check that the surface is suitable for anchoring. If the hole is too large, the bolt may not expand properly.
Corrosion is visible on the bolt.
Replace the bolt. The zinc passivated finish provides corrosion resistance, but harsh conditions may cause corrosion over time.
Pros and Cons
Pros
- Provides a strong and reliable anchor point.
- Zinc passivated finish for corrosion resistance.
- Easy to install with standard tools.
- Suitable for various solid surface materials.
Cons
- Not suitable for applications needing building code approval.
- Requires a 16mm hole for installation.
- Requires a 16mm spanner for tightening.
Setup, Compatibility & Care
Setup
- Drill the Hole: Use a 16mm drill bit to create a hole in the masonry or concrete.
- Insert the Bolt: Insert the Amtech bolt into the hole.
- Tighten the Bolt: Use a 16mm spanner to tighten the expansion nut, expanding the bolt and securing it in place.
Compatibility
The Amtech bolts are compatible with masonry, concrete, brick, block, and stone. *They are not recommended for use in applications requiring building code approval.*
Care
Regularly inspect the bolts for signs of corrosion or damage. If corrosion is present, consider replacing the bolt. Ensure the anchor point remains free from excessive stress or movement.