Autotek Spray Paint - Crystal Black - 300ml
Best current price£12.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£12.99Visit shop Autotek Honda Crystal Black High Coverage Aerosol Spray Paint Fast Drying 300mL
Visit shopeBay£12.99Visit shop All Offers
4 offers from £12.99 - £13.99
View price history by clicking the chart icon.
eBayAutotek Honda Crystal Black High Coverage Aerosol Spray Paint Fast Drying 300mL
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Honda Crystal Black High Coverage Aerosol Spray Paint Fast Drying 300mLFree delivery in 1–3 days£13.99Visit shop →
My Motor WorldAutotek Black Honda Crystal Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Black Honda Crystal Spray Paint 300MlFree delivery in 1–3 days£12.99Visit shop →
Product Information
Full details
This Autotek Spray Paint in Crystal Black (300ml) is designed for car owners and DIY enthusiasts seeking an exact colour match for Honda vehicles (2007-2019). Its primary benefit is providing a durable, professional finish with high colour precision. A key consideration is the need for proper surface preparation and application in a well-ventilated area within a specific temperature range.
All features
| Colour | Black |
|---|---|
| Model Part Number | MC256300 |
| Brand | Autotek |
| Container Volume | 300ml |
Extended Product Information
FAQs
What Honda models is this paint compatible with?
This specific Crystal Black paint is designed for Honda models manufactured between 2007 and 2019, matching the NH731P paint code.
Can I use this on plastic parts?
Yes, this spray paint is suitable for application on rigid plastic surfaces, as well as metal and glass fibre.
How many coats should I apply?
It is recommended to build up the finish with several thin coats, allowing 10-20 minutes between each application for optimal results.
What is the best temperature for application?
The ideal temperature range for applying this spray paint is between 15°C and 25°C.
Do I need a primer?
Yes, applying a minimum of two coats of Autotek Grey Primer is recommended for optimum adhesion and the best possible finish.
How long does it take to dry?
The paint should be touch dry within 10-20 minutes, but it needs to fully cure for 24 hours.
Can I use this over existing paintwork?
Yes, it is compatible with nearly all automotive paint finishes, including cellulose finishes.
Troubleshooting
Uneven paint application or runs
Apply thinner coats from a slightly further distance. Ensure the can is held at a consistent angle. Allow adequate drying time between coats.
Paint not adhering properly
Ensure the surface was thoroughly cleaned and degreased. Apply Autotek Grey Primer before the topcoat for optimal adhesion.
Nozzle is blocked
Turn the can upside down and spray for a few seconds after each use to clear the nozzle. If blocked, try removing the nozzle and soaking it in a suitable solvent, then reattaching.
Poor colour match
Verify the paint code (NH731P) matches your Honda vehicle. Ensure the underlying primer is consistent and not affecting the final colour.
Spray pattern is inconsistent
Shake the can thoroughly before and during use. Check for any obstructions around the nozzle.
Pros and Cons
Pros
- Provides an exact colour match for specific Honda models.
- Durable and long-lasting finish.
- Fast-drying formula saves time.
- Suitable for various automotive materials.
- Achieves a professional, high-quality appearance.
Cons
- Requires thorough surface preparation for best results.
- Best application is limited to a specific temperature range (15°C-25°C).
- Needs to be used outdoors or in a very well-ventilated area.
- Paint code specificity may limit use to certain vehicle years/models.
- Requires primer for optimal adhesion.
Setup, Compatibility & Care Instructions
Preparation is key for optimal results.
- Clean the Surface: Thoroughly clean the area to be painted, ensuring it is free from dirt, grease, wax, oil, and rust.
- Masking: Carefully mask off the surrounding areas to prevent overspray.
- Priming: For best adhesion and finish, apply a minimum of two coats of Autotek Grey Primer. Allow adequate drying time between primer coats.
Application Guidelines:
- Shake Well: Shake the aerosol can vigorously for at least 2 minutes before use.
- Spray Distance: Hold the can 15-25cm away from the surface.
- Coating: Apply several thin coats, waiting 10-20 minutes between each application. This helps build an even layer and avoids drips.
- Nozzle Care: After each use, turn the can upside down and spray for 2-5 seconds to clear the nozzle and prevent blockages.
- Curing: Allow the paint to become touch dry within 10-20 minutes, and fully cure for 24 hours.
Environmental Conditions:
- Use only outdoors or in a well-ventilated area.
- Ideal application temperature is between 15°C and 25°C.
Compatibility: Compatible with metal, glass fibre, rigid plastic, and most automotive paint finishes, including cellulose.