Best current price£13.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.99Visit shop B&Q - Exh001 Red Hardener For Resin Body Fillers 40Gm X4 Excellent Coverage
Visit shop3 offers from £13.99 - £14.99
View price history by clicking the chart icon.
The Tetrosyl EXH001 Red Hardener is designed for DIY and professional auto body repairers needing to smooth imperfections and fill holes in vehicle surfaces. Its key benefit is providing a reliable cure for Tetrosyl Polyester body fillers, ensuring a durable repair. A primary consideration is that it must be used strictly with Tetrosyl Polyester fillers for optimal performance and safety.
| Model Part Number | EXH001 |
|---|---|
| Brand | Tetrosyl |
This Tetrosyl EXH001 Red Hardener is designed exclusively for use with Tetrosyl Polyester resin body fillers.
The exact amount of hardener depends on the specific Tetrosyl Polyester filler you are using. Always refer to the instructions provided on the filler product's packaging for the recommended mixing ratio.
No, it is strongly recommended to only use this hardener with Tetrosyl Polyester fillers. Using it with other brands may lead to unpredictable results or failure of the repair.
The red color acts as a visual indicator to help ensure that the hardener is thoroughly and evenly mixed into the filler, promoting consistent curing.
Store the hardener in its original, sealed container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is tightly closed after each use.
While a specific shelf life is not detailed here, it's best practice to use the product within a reasonable timeframe after purchase and to check for any visible signs of degradation. Ensure the container is always sealed tightly to maintain its effectiveness.
Ensure you have used the correct Tetrosyl Red Hardener with Tetrosyl Polyester filler. Verify that the hardener and filler were mixed in the correct ratio as per the filler's instructions. Check the expiry date of both products; old hardener may lose effectiveness.
You may have used too much hardener. Reduce the amount of hardener in your next mix according to the filler's instructions. Ensure you are working in a cool environment; higher temperatures can accelerate curing.
This often indicates insufficient mixing. Ensure the hardener is thoroughly and evenly mixed into the filler until a uniform color is achieved before application.
Setup: To use the Tetrosyl EXH001 Red Hardener, first ensure you have Tetrosyl Polyester filler. Dispense the required amount of filler onto a clean, flat mixing board. Add the recommended amount of hardener paste to the filler – typically a small strip, following the instructions on the filler product packaging for precise ratios. Mix the hardener thoroughly into the filler using a clean mixing spatula until a uniform color is achieved. Over-mixing or under-mixing can affect performance.
Compatibility: This hardener is specifically designed and tested for compatibility *only* with Tetrosyl Polyester resin body fillers. Using it with other types of fillers or unrelated products may result in improper curing, poor adhesion, or hazardous reactions.
Care: Store the hardener in its original, tightly sealed container in a cool, dry place, away from direct sunlight and heat sources. Ensure the cap is securely fastened after each use to prevent drying out or contamination. Keep out of reach of children. Dispose of unused product and empty containers according to local regulations.
