Royal Leisure Inflatable Event Shelter - White

With the single-point inflation system and practice, setup can usually be completed in under 5-10 minutes.

The shelter has a hydrostatic head rating of 2000mm, indicating good water resistance for moderate rain.

No, side walls are optional and sold separately (Product Code: W532).

The dimensions are 3.5 meters in length, 3.5 meters in width, and 2.3 meters in height.

The shelter is designed for moderate weather conditions. While it has water resistance and stability features, it is not intended for use in severe storms.

The shelter includes a manual air pump, 4-piece reinforced fibreglass poles, tent pegs, guylines, and a carry bag.

Use a damp cloth to wipe away dirt. For tougher stains, a mild soap solution can be used, followed by thorough rinsing and complete air drying before storage.

Ensure the air pump is securely attached to the inflation valve. Check that the valve itself is fully open. Continue pumping until firm.

Verify that the flysheet seams are fully sealed. For minor leaks, seam sealant can be applied (sold separately). Ensure the shelter is pitched correctly to allow water runoff.

Ensure all guylines are taut and properly secured to the ground. Adjust pegging points to achieve maximum tension. Consider using additional heavier-duty pegs or sandbags for extra security in windy conditions.

The shelter was likely stored while damp. Thoroughly clean the affected areas with a mild detergent and water, rinse, and allow to air dry completely before storing again.