Laser Tools Oil Filter Pliers - 60 - 120mm

The Laser Tools Oil Filter Pliers are designed to work with oil filters ranging from 60mm to 120mm in diameter.

The pliers have spring-loaded jaws that automatically grip the filter when the handles are squeezed. Releasing the handles allows the jaws to adjust to the filter's size within the specified range.

No, the tool is specifically designed for filters within the 60mm to 120mm range. Using it outside this range may result in poor grip or damage to the tool or filter.

The 30° offset is a feature designed to improve access in tight engine compartments. While not strictly necessary for every filter change, it significantly aids in maneuverability where space is limited.

Clean the jaws and handles with a damp cloth after use. For stubborn grime, use a mild degreaser and wipe dry. Store in a dry place.

The serrated jaws are designed to provide grip. While they can potentially scratch the filter surface, this is usually inconsequential as the filter is a disposable part. Use moderate pressure to avoid deforming the filter can excessively.

The pliers are constructed from layered steel for durability and feature non-slip cushion grip handles.

Ensure the filter diameter is within the 60-120mm range. Clean the serrated jaws of any oil or debris. Make sure the handles are squeezed sufficiently to fully engage the spring-loaded mechanism.

Clean both the oil filter and the serrated jaws of the pliers. Ensure the pliers are centered on the filter. For very stubborn filters, additional leverage may be needed, but be cautious not to damage the filter can.

Utilize the 30° offset head to navigate around obstructions. If the filter is in an extremely confined space, alternative tools or filter removal methods may be necessary.

Clean the jaw mechanism with a light degreaser and wipe dry. Ensure no debris is obstructing the spring's movement. Apply a small amount of lubricant if necessary, following manufacturer recommendations for tool care.