Car Air Con Conditioning Top up Refill DIY AC Can - B&Q - R134A

This product is designed for R134a systems and is an R134a Equivalent that does NOT contain HFCs.

You can usually find this information under the bonnet of your car or in your vehicle's owner's manual. It is common in most cars up to 2016 and commercial vehicles up to 2021.

Yes, you will need a suitable manifold and gauge set (not supplied) to safely and accurately recharge your AC system.

No, this product is specifically for R134a systems only. Using it on an R1234yf system can cause damage.

Always wear safety goggles and gloves. Avoid loose clothing around running engines. Ensure you are in a well-ventilated area.

No, this product is not designed for use on systems that require vacuuming before recharge. It is intended as a top-up solution for systems that have lost refrigerant but have not been opened or evacuated.

You should use a suitable manifold and gauge (not supplied) to deploy enough product into the vehicle to fill to the specified level recommended in your vehicle's manual for peak AC performance.

Ensure the vehicle's AC system is R134a compatible and the correct low-side port was used. Check for obvious leaks. A professional inspection may be required if performance does not improve.

Ensure you are using the correct adapter for the R134a low-side port and that all connections are securely tightened. Refer to the instructions for your manifold and gauge set.

Check that the can is upright and the valve on the can and your manifold gauge is open. Ensure the can is at room temperature and not frozen.

Stop dispensing the product immediately. Use the manifold gauge to check system pressure and consult your vehicle manual or a professional to understand safe operating pressures.