Isopon Metalik Alloy Wheel Repair Filler - 250ml

Isopon Metalik is suitable for most types of alloy wheels.

You'll need sandpaper, a mixing stick, and potentially a spreader. A degreaser and primer/paint designed for alloy wheels are also necessary.

Drying time depends on the temperature and humidity. Refer to the product instructions for specific details.

While the product is designed for alloy wheels, it *may* be suitable for steel wheels. However, it is primarily intended for alloy applications.

The filler itself isn't waterproof but once painted, the repair should be waterproof.

The amount needed varies based on the size and depth of the damage. Start with a small amount and mix more as needed.

Ensure the correct ratio of filler and hardener was used. Check that the hardener is not expired. Work in the recommended temperature range.

Apply filler in thin layers and allow each layer to dry fully before applying the next. Avoid applying too much filler at once.

Use the appropriate grade sandpaper, starting with a coarser grit and gradually moving to finer grits. Ensure the filler is fully dry.