Best current price£199.24from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£199.24Visit shop Corsair Mp600 Pro M.2 1000 Gb Pci Express 4.0 3D Tlc Nand Nvme 840006637325
Visit shop2 offers from £199.24
View price history by clicking the chart icon.
The Corsair MP600 PRO 1 TB M.2 NVMe SSD is designed for PC enthusiasts and professionals seeking extreme storage performance. Its key benefit is significantly faster load times and data transfer speeds thanks to its PCIe Gen4 interface, enabling up to 7,000MB/sec sequential read speeds. A potential caveat is the requirement for a motherboard that supports PCIe Gen4 M.2 NVMe drives to achieve maximum performance. This SSD offers a compact M.2 2280 form factor, high-density 3D TLC NAND for endurance, and a built-in aluminum heatspreader to maintain performance.
| Series | MP600 PRO |
|---|---|
| Model Part Number | CSSD-F1000GBMP600PRO |
| Brand | Corsair |
PCIe Gen4 offers double the bandwidth of PCIe Gen3. While the MP600 PRO will function in a Gen3 slot, its speeds will be limited to Gen3 levels (typically around 3,500 MB/s sequential read).
The Corsair MP600 PRO comes with a built-in aluminum heatspreader designed to manage heat. However, for intensive, sustained workloads, ensuring good overall system airflow is recommended.
TBW stands for Terabytes Written. It's a measure of the total amount of data that can be written to the SSD before its lifespan might be impacted. A higher TBW rating indicates greater endurance.
Yes, absolutely. Using an NVMe SSD like the MP600 PRO as a boot drive will significantly reduce system boot times and application load times.
The MP600 PRO supports AES 256-bit hardware encryption. Enabling and managing this typically involves using compatible motherboard BIOS settings or specific management software, depending on your system configuration.
Corsair typically offers a limited warranty on their SSDs. Please refer to the official Corsair product page or warranty documentation for the exact duration and terms.
The Corsair MP600 PRO, with its M.2 2280 form factor and PCIe Gen4 interface, meets the physical and speed requirements for expansion in a PlayStation 5. However, always check the latest PS5 firmware and Sony's official compatibility guidelines before installation.
Ensure the SSD is properly seated in the M.2 slot and secured. Verify that the M.2 slot is enabled in BIOS/UEFI and set to NVMe mode. Try a different M.2 slot if available.
Confirm your motherboard and CPU support PCIe Gen4. Check if the SSD is installed in a PCIe Gen4 x4 slot. Ensure storage drivers are up-to-date and that the drive is not running too hot (check temperatures).
The drive likely needs to be initialized and partitioned. Open Disk Management, right-click the unallocated space, and select 'New Simple Volume'.
Ensure adequate airflow in your PC case. The built-in heatspreader is effective, but in demanding sustained workloads, additional cooling from the motherboard or a dedicated M.2 cooler might be beneficial.
Setup:
Compatibility:
Care:
