Best current price£9.09from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£9.09Visit shop 10Mm Drill Chuck & Key - 3/8" X 24 Unf Thread - Cordless Power Tool Key 5056524272978
Visit shop
B&Q£9.89Visit shop - 10mm Drill Chuck & Key3/8" X 24 Unf ThreadCordless Power Tool Key
Visit shop3 offers from £9.09 - £9.89
View price history by clicking the chart icon.
The Loops 10mm Drill Chuck and Key set is an essential accessory for DIY enthusiasts and professionals seeking a reliable replacement or upgrade for their cordless drills, air tools, and drill presses. It offers a secure 3/8-inch by 24 UNF thread mounting and a versatile 1-10mm capacity, making it perfect for precision drilling tasks; however, users should ensure their existing tool spindle matches the 3/8-inch-24 UNF thread specification before installation.
| Model Part Number | ys03961 |
|---|---|
| Brand | Loops |
It depends on the spindle thread; you must confirm that your tool spindle specifically uses a 3/8 inch by 24 UNF thread.
This chuck is designed for standard drilling operations; it is not recommended for high-impact forces generated by impact drivers.
The chuck has a maximum capacity of 10mm.
Yes, the product includes the necessary chuck key for tightening and loosening the jaws.
Typically, you need to open the jaws fully to access a retaining screw inside the chuck, remove that screw (which is often reverse-threaded), then unscrew the chuck from the spindle.
Clear any debris from the jaw tracks and apply a small amount of light machine oil to the moving parts.
Ensure the chuck key is fully engaged in all three gear holes while tightening to ensure even pressure on the bit shank.
Check that the chuck is threaded completely onto the spindle and that no debris is lodged between the mating surfaces.
To install the chuck, first ensure the power tool is disconnected from its power source or battery. Clean the spindle threads of any debris or old thread-locking compound. Carefully thread the chuck onto the spindle by hand, then secure it by tightening against the spindle shoulder. To maintain the mechanism, occasionally apply a light machine oil to the gear teeth and jaw tracks to prevent rust and ensure smooth operation. Always store the chuck key in a designated location or attach it to the tool cord to prevent loss.
