Living and Home 60inch Wall Mount Electric Fireplace

Yes, the flame effect can be operated independently of the heating function, allowing you to enjoy the ambiance year-round without additional warmth.

Installation is designed to be straightforward. The product comes with all necessary hardware and clear, step-by-step instructions for both wall-mounting and freestanding setups. It typically requires basic DIY skills.

The fireplace requires a standard 120V household electrical outlet. Ensure the circuit can handle the fireplace's wattage to avoid tripping breakers. > Info needed: Specific wattage for heat and flame effect.

Electric fireplaces are generally safe for extended use as they don't produce real flames or fumes. However, it's always recommended to exercise caution with any heating appliance. > Info needed: Does this model include overheat protection/automatic shut-off?

Unplug the unit first. Use a soft, lint-free cloth and a non-ammoniated glass cleaner (suitable for electronics) to gently wipe the glass. Avoid harsh chemicals or abrasive materials that could scratch the surface.

This fireplace provides powerful supplemental heating suitable for living rooms, bedrooms, and offices. The effectiveness in very large, open-concept spaces may vary. > Info needed: Manufacturer's recommended maximum heating area in square footage.

> Info needed: Please consult your purchase documentation or contact Living and Home customer support for specific warranty information.

Check that the power cord is securely plugged into a working electrical outlet. Ensure the wall switch (if applicable) is in the 'on' position. Try a different outlet to rule out an issue with the power source. Check the main power switch on the fireplace unit itself.

Ensure the heat function is activated via the remote control or control panel. Check that the thermostat setting is higher than the current room temperature. Verify that the air intake and heat outlet vents are not blocked.

Check if the flame effect is enabled via the remote control. Adjust the brightness settings. Ensure the internal LED bulbs are not loose or damaged (consult manual or customer support if suspecting bulb issue).

Replace the batteries in the remote control (typically 2x AAA). Ensure there are no obstructions between the remote and the fireplace's sensor. Point the remote directly at the fireplace.

A gentle hum from the fan when the heater is on is normal. If you hear grinding or loud rattling, unplug the unit immediately and contact customer support. Ensure the unit is level if freestanding.