Best current price£1.51from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£1.51Visit shop Plasson Adaptor Set Class C L/D 1/2" Pl7786005
Visit shop
The Range£6.26Visit shop Plasson Adapter Imperial Conversion Set Class C H/D - 32 X 1" Lt Blue - Pl077808010 - Grey
Visit shop32 offers from £1.51 - £17.22
View price history by clicking the chart icon.
This Plasson conversion set is designed for plumbers and DIY enthusiasts needing to connect MDPE pipes to Imperial Class C High Density pipes. Its key benefit is providing a reliable, tool-free jointing solution for water supply pipes, effectively joining older Alkathene and Irish black pipes to Metric PE. A crucial caveat is understanding the BSP sizing; a '3/4 Inch' BSP thread measures 1 inch in diameter, so if your thread measures 3/4 inch, you need the 1/2 inch version.
| Model Part Number | Pl077808007 |
|---|---|
| Brand | Plasson |
Pay close attention to BSP thread sizing. A '3/4 Inch' BSP thread on this product measures 1 inch in diameter. If your pipe thread *actually measures* 3/4 inch in diameter, you need the 1/2 inch version of this fitting.
This set is designed to connect MDPE pipes with Imperial Class C High Density pipes. It's also effective for joining older Alkathene and Irish black pipes to Metric PE pipes.
No, the Plasson conversion set is designed for simple, tool-free installation, requiring no special tools.
Yes, these fittings are designed for durable water supply applications, including underground installations, provided the pipework is installed correctly.
Ensure pipe ends are clean, cut square, and fully inserted into the fitting. The mechanical coupler is designed to create a secure, watertight seal once the pipe is properly seated.
Please refer to the retailer or manufacturer's specific warranty information for this product, as warranty periods can vary.
While designed for specific pipe types (MDPE, Imperial Class C HD, Alkathene, Irish black, Metric PE), performance with other brands may vary. Always ensure compatibility with your specific pipe material and dimensions.
Ensure pipe ends are clean, cut square, and fully inserted into the fitting. Verify the correct fitting size is used for the pipe diameter. Check that the pipe is compatible with the fitting type.
Confirm the pipe end is not damaged or deformed. Ensure the fitting's internal mechanism is clear. Lightly moisten the pipe end if necessary, but avoid lubricants.
Verify the correct type of adaptor is being used with the mechanical coupler. Ensure the pipe has reached its full insertion depth within the fitting.
Setup: Ensure the ends of both the MDPE and Imperial Class C High Density pipes are clean, free from burrs, and cut square. Insert the appropriate adaptor into the mechanical coupler, then firmly push the Metric PE pipe into one side and the Imperial pipe into the other until fully seated. Tighten any securing mechanisms as per the specific coupler design. IMPORTANT SIZING NOTE: BSP threads are measured larger than stated. A '3/4 Inch' BSP thread on this fitting measures 1 inch in diameter. If your pipe thread *actually measures* 3/4 inch in diameter, you require the 1/2 inch version of this product.
Compatibility: Primarily designed for connecting MDPE (Medium Density Polyethylene) pipes to Imperial Class C High Density pipes. It is also effective for joining older Alkathene and Irish black pipes to Metric PE pipes. Ensure the pipe material and dimensions match the product's intended use.
Care: No specific maintenance is required for the fitting itself under normal operating conditions. Periodically check connections for any signs of leakage, especially after initial installation or significant system pressure changes. Keep the fittings clean and stored away from direct sunlight or extreme temperatures when not in use.
