EVERBUILD 405 PATH AND PATIO SEAL 25LTR
Best current price£78.50from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£78.50Visit shop Sika Path & Patio Sealer | Solvent Free Acrylic Coating | 25ltr
Visit shopeBay£78.50Visit shop All Offers
3 offers from £78.50 - £119.83
View price history by clicking the chart icon.
eBaySika Path & Patio Sealer | Solvent Free Acrylic Coating | 25ltr
Free delivery in 1–3 days
£78.50
Visit shop
OnBuy.comEverbuild 405 Path And Patio Seal Paving Sealer - 25 Litre 5029347000660
Free delivery in 1–3 days
£119.83
Visit shop
Everbuild 405 Path And Patio Seal Paving Sealer - 25 LitreFree delivery in 1–3 days£119.83Visit shop →
Product Information
Full details
This guide is designed for homeowners and contractors looking to protect their outdoor surfaces. The EVERBUILD 405 PATH AND PATIO SEAL provides a durable, water-repellent finish, safeguarding against the elements and making cleaning easier. However, it's crucial to apply it correctly to ensure optimal performance and longevity.
All features
| Model Part Number | 405 |
|---|---|
| Brand | Everbuild |
Extended Product Information
FAQs
How long does it take for the sealer to dry?
Drying times vary depending on weather conditions. Generally, it takes a few hours to touch dry, but allow at least 24 hours for full cure before allowing foot traffic.
How often should I reapply the sealer?
The reapplication frequency depends on the wear and tear of the surface. Typically, reapplication is recommended every 1-3 years, or as needed, to maintain protection.
Can this sealer be used on driveways?
Yes, it is suitable for driveways, but consider the amount of traffic and the need for regular maintenance. Ensure proper preparation of the surface.
Is the sealer slippery?
The sealer provides a low-sheen finish, but it can be slippery when wet. Exercise caution, especially on sloped surfaces.
What tools do I need to apply the sealer?
You will need a brush, roller, or sprayer, along with suitable gloves and eye protection.
Can I use this product on painted surfaces?
No, this product is designed for unpainted surfaces like concrete, stone and paving.
Troubleshooting
Sealer is not adhering properly.
Ensure the surface was thoroughly cleaned and free of contaminants before application. Check the product instructions for any specific surface preparation requirements.
White patches or discoloration after application.
This could be due to applying too much sealer at once. Apply in thin, even coats and avoid puddling. Ensure the surface is completely dry before applying the next coat.
Sealer is not drying properly.
Check the temperature and humidity levels. Ensure the surface is not exposed to extreme temperatures or high humidity during application and drying. Make sure the applied coat is thin and even.
Pros and Cons
Pros
- Provides long-lasting protection against water, oil, and petrol.
- Enhances the appearance of treated surfaces with a low-sheen finish.
- Reduces the growth of moss and fungi.
- Easy to apply with a brush, roller or sprayer.
- Environmentally friendly due to its solvent-free formulation.
Cons
- Requires proper surface preparation for optimal adhesion.
- May require multiple coats for heavily used areas.
- Not suitable for all types of surfaces; always test in an inconspicuous area first.
- Application in extreme temperatures is not recommended.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose debris, oil, grease, and existing coatings. Clean the surface thoroughly using a suitable cleaner.
- Application: Apply evenly using a brush, roller, or sprayer. Apply at least two coats, allowing the first coat to dry before applying the second. Refer to the product instructions for specific coverage rates and drying times.
- Compatibility: Compatible with concrete, natural stone, block paving, and other similar surfaces. Always test in an inconspicuous area before full application to ensure compatibility and desired finish.
- Care: Regularly clean the sealed surface with mild detergent and water. Avoid using abrasive cleaners or high-pressure washers, as they can damage the coating. Reapply as needed to maintain protection.