Lee Little Stopper Filter - LEE Filters
Best current price£97.00from Wex Photo Video
Best offers
Shopping.co.uk recommended and popular offers
Wex Photo Video£97.00Visit shop LEE Filters - Little Stopper - 100x100mm Filter - 6 Stop
Visit shopWex Photo Video£97.00Visit shop All Offers
2 offers from £97.00 - £99.00
View price history by clicking the chart icon.
Wex Photo VideoLEE Filters - Little Stopper - 100x100mm Filter - 6 Stop
Free delivery in 1–3 days
£97.00
Visit shop
Used Offer
1 offer from £59.00
View price history by clicking the chart icon.
Product Information
Full details
The Lee Little Stopper is a precision-engineered, six-stop neutral density filter designed for landscape photographers and creative artists who need to extend their shutter speeds during low-light conditions like dawn or dusk. It acts as the perfect middle ground when a standard 10-stop ND filter would result in overly long, dark exposures, allowing you to capture stunning motion blur in waterfalls, clouds, or crowds while maintaining manageable shutter speeds. The primary caveat is that it requires a dedicated Lee filter holder system, which represents a significant additional investment if you do not already own the mounting hardware.
All features
| Brand | LEE Filters |
|---|
Extended Product Information
FAQs
Is the Little Stopper suitable for midday photography?
It is generally too light for long exposures in bright midday sun; you would likely need a 10-stop filter for that purpose.
Can I stack the Little Stopper with other filters?
Yes, it can be stacked with other filters, though stacking multiple filters may increase the risk of vignetting on wide-angle lenses.
Does this filter cause vignetting?
On most standard lenses, it does not. However, on ultra-wide-angle lenses, ensure you are using the filter in the slot closest to the lens.
How do I calculate shutter speeds with this filter?
You can use a standard ND exposure chart or a smartphone app by inputting your base shutter speed and selecting the 6-stop reduction.
Do I need a lens cap with this filter?
You should use your lens cap during transport, but it must be removed to attach the filter holder system.
Troubleshooting
Image shows a red or magenta color cast
This is common with high-density filters. Adjust your camera's White Balance settings or correct the tint in post-processing software.
Light streaks or artifacts appear in the image
Ensure the filter is pushed fully into the holder and the foam seal is flush against the unit to prevent light leakage.
Image appears blurry despite using a tripod
Ensure your camera's image stabilization is turned off and use a remote shutter release to prevent vibrations during long exposures.
Pros and Cons
Pros
- Perfect light reduction level for dawn and dusk scenarios
- Allows for handheld-style long exposures without excessive shutter times
- High-quality optical glass minimizes image degradation
- Enables creative motion effects like silky water and blurred clouds
- Maintains excellent sharpness across the entire image
Cons
- Requires a specific Lee Filters holder system
- Not intended for bright midday sun where 10-stop filters are necessary
- Additional cost for mounting hardware
- Needs careful cleaning to prevent surface scratches
Setup, Compatibility & Care
To use the Little Stopper, you must slide the filter into the slot of a Lee Filters holder. Ensure that the foam seal on the back of the filter is properly seated against the holder to prevent light leaks, which can cause internal reflections or unwanted haze during long exposures. Always use a remote shutter release or the camera's self-timer to avoid vibration-induced blur during your exposure.
For care, store the filter in the provided protective case when not in use. Clean only with a dedicated lens cloth and photographic lens cleaning solution to avoid scratching the optical coating. Inspect the foam seal periodically; if it becomes damaged or loses its adhesive, it should be replaced to maintain the integrity of your long-exposure shots.