Golden Grace Euro Cylinder Lock - Satin Nickel - 60mm

Secure your home with the Golden Grace Euro Cylinder Lock in a sleek satin nickel finish. This 60m...

Best current price£10.89from B&Q

All Offers

4 offers from £10.89 - £15.75

View price history by clicking the chart icon.

B&QB&Q - 1 Set Euro Cylinder Door Key Hole Lock Satin Nickel Finish With 3 Keys60mm
Free delivery in 1–3 days
£10.89
Visit shop
HomebaseGolden Grace Door Key Hole Euro Satin Nickel Cylinder Lock With Keys 60Mm
Free delivery in 1–3 days
£15.75
Visit shop
wilkoGolden Grace Euro Cylinder Lock 60mm Satin Nickel
Free delivery in 1–3 days
£15.75
Visit shop

Product Information

Full details

This guide is for homeowners seeking an affordable yet reliable security upgrade for their doors. The Golden Grace Euro Cylinder Lock provides enhanced security with its 6-pin design and durable satin nickel finish, offering peace of mind for various indoor and outdoor applications. A potential consideration is that it comes with standard security features, not advanced anti-snap or anti-bump technology.

All features

ColourSilver
Model Part Number5177SS
BrandGolden Grace

Extended Product Information

FAQs

What size is this Euro cylinder lock?

This is a 60mm Euro cylinder lock, typically measured as 30mm on each side (30/30).

How many keys come with the lock?

Each Golden Grace Euro Cylinder Lock comes with three keys.

Can this lock be used on an exterior door?

Yes, it is designed for both indoor and outdoor use, including exterior doors.

What type of lock mechanism does it use?

It features a 6-pin tumbler mechanism, providing a standard level of security.

Is this lock anti-snap or anti-bump?

This lock offers standard security features and does not specifically include anti-snap or anti-bump technology.

What is the finish of this lock?

The finish is a sleek satin nickel.

How do I install this lock?

Installation typically involves removing the old cylinder by undoing a retaining screw on the door edge and sliding the old cylinder out, then sliding the new one in and re-securing the screw.

Troubleshooting

Key does not turn or turn fully

Ensure the correct key is fully inserted. Check if the door bolt is extending and preventing the cylinder from turning. Try operating the lock with the door open. If stiff, consider cleaning and lubricating the mechanism.

Cylinder does not fit into the lock case

Verify that the cylinder size (60mm) and type (Euro profile) match your door's lock case. Measure your existing cylinder accurately.

Lock feels stiff or difficult to operate

Clean any visible dust or debris from the keyway. Apply a small amount of graphite lock lubricant to the keyway and work the key back and forth.

Pros and Cons

Pros

  • Easy to install on existing doors with Euro profile locks.
  • Provides a noticeable security improvement over basic locks.
  • Durable satin nickel finish resists corrosion and maintains appearance.
  • Cost-effective solution for home security upgrades.
  • Suitable for a wide range of doors, both interior and exterior.

Cons

  • Does not feature advanced anti-snap or anti-bump technology, making it more vulnerable to sophisticated break-in methods.
  • Requires a specific Euro profile lock case for installation.
  • Requires access to both sides for key operation, which might be a minor inconvenience in some scenarios.

Setup, Compatibility & Care

Compatibility: This lock is designed for doors fitted with a standard Euro profile lock case. Measure your existing cylinder to ensure a 60mm (30mm + 30mm) size is correct. The bolt on your door should retract and extend smoothly when the lock is operated.

Setup:

  1. Ensure the door is open.
  2. Insert the key into the cylinder from either side and turn it slightly to ensure it aligns with the lock mechanism.
  3. If the existing cylinder is being replaced, remove the retaining screw from the edge of the door, typically located in line with the cylinder's center.
  4. Gently push the cylinder into the lock case and turn the key slightly in both directions while applying gentle pressure to help the cam retract and allow the cylinder to slide fully into place.
  5. Reinstall the retaining screw.

Care: Clean the lock cylinder periodically with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or lubricants, as they can attract dirt and potentially damage the mechanism. If the lock becomes stiff, a light application of graphite-based lubricant specifically designed for locks can be used.

Price History

DatePrice
Visit shop