Green Blade Garden Lopper & Secateurs Set

The 15" bypass lopper is designed for branches typically up to 1 inch (approx. 2.5 cm) in diameter. For best results and tool longevity, stay within this recommended capacity.

While the blades are made of durable carbon steel, they are not typically designed for user replacement. They can be sharpened, but if significantly damaged, the tool may need to be replaced.

It's recommended to lubricate the pivot points after cleaning or at least every few uses, especially if the tools are stored for extended periods or used in damp conditions.

No, these garden tools are specifically designed for cutting plant material. Attempting to cut wire or metal can damage the blades and void any warranty.

Bypass loppers have two curved blades that slide past each other, similar to scissors, making clean cuts on live wood. Anvil loppers have a sharp blade that closes onto a flat surface (anvil), best suited for cutting dead wood.

Clean the PVC grips with a damp cloth. Avoid using harsh chemicals or solvents that could degrade the material. Ensure they are dry after cleaning.

Clean the blades and pivot point thoroughly to remove any sap or debris. Apply a light lubricant to the pivot mechanism and work the handles back and forth until smooth.

The blades may be dull. Sharpen them using a whetstone or blade sharpener. Ensure the blade tension is correctly adjusted if applicable to the model.

Ensure the blades are fully closed and clean. A small amount of lubricant applied to the clip mechanism might help.

Wipe the PVC grips with a dry cloth. If grips are worn or damaged, consider replacement if possible, or use work gloves for added grip.