Best current price£112.00from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£112.00Visit shop Soho Lighting Black/Light Polished Chrome 4 Gang Dimmer And Rocker Switch Combo (2 X 2-Way Intelligent Dimmer & 2 X 2-Way Switch)
Visit shop1 offer from £112.00
View price history by clicking the chart icon.
This Soho Lighting 4 Gang Switch with 2 Dimmers is designed for homeowners looking to upgrade their lighting control with a sleek, modern, and intelligent solution. Its key benefit is the combination of dimming and standard switching capabilities in a single unit, offering flexibility and energy efficiency. A potential caveat is the need for specific dimmable bulbs for optimal performance. This product integrates two 2-way intelligent dimmers (150W LED / 300W Halogen) with two 2-way switches, featuring Enkin PDM150 modules for safety and extended bulb life through soft-start technology.
| Colour | Silver |
|---|---|
| Model Part Number | SS-SH-20-LTS152-PCW |
| Brand | The Soho Lighting Company |
You can use dimmable LED bulbs with a maximum total load of 150W, or dimmable Halogen/Incandescent bulbs with a maximum total load of 300W.
No, this dimmer is specifically designed for dimmable bulbs. Using non-dimmable bulbs will result in flickering, buzzing, or failure to dim.
You will need to connect this intelligent dimmer to a standard 2-way switch. Refer to the wiring diagram provided with the Enkin module for correct installation.
Soft-start technology gradually brings the lights to the set level over 1-2 seconds, which helps to prolong the lifespan of your lightbulbs.
You can switch between modes using the simple push button located on the Enkin PDM150 module integrated into the switch.
The dimmer includes short circuit protection, overload protection, and a self-recovering thermal fuse for enhanced safety and reliability.
Use a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents to protect the finish.
Ensure you are using dimmable LED or Halogen/Incandescent bulbs. Check that the total bulb wattage does not exceed the 150W (LED) or 300W (Halogen/Incandescent) limit. Try switching the dimmer mode (leading/trailing edge) using the module's button.
Verify wiring connections are secure and correct for a standard 2-way switch setup. Ensure the circuit breaker for the lighting is engaged.
The soft-start speed is fixed by the Enkin PDM150 module and cannot be adjusted.
Check the total wattage of the connected bulbs to ensure it is within the specified limits. Verify that the unit is properly installed with adequate ventilation and is not covered by curtains or other materials.
Setup: Installation requires basic electrical wiring knowledge. Ensure the power supply is switched off before commencing. The dimmer mode (leading/trailing edge) can be adjusted using the button on the Enkin PDM150 module. For 2-way switching, connect the dimmer to a standard 2-way switch using appropriate wiring. Refer to the included Enkin module manual for detailed wiring diagrams.
Compatibility: This switch is compatible with dimmable LED bulbs (max 150W total load) and dimmable Halogen/Incandescent bulbs (max 300W total load). Ensure your bulbs are explicitly marked as dimmable. It is designed for use with standard UK mains wiring.
Care: Clean the polished chrome plate with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, as they can damage the finish. Ensure the ventilation around the unit is not obstructed to prevent overheating.
