Flopro Plug & Go Greenhouse Automatic Drip Watering System Kit - Green

The Flopro Plug & Go system is designed to water up to 24 pots and containers.

No, the system is designed for a simple, quick, and easy setup that requires no tools or scissors.

While designed for greenhouses, it can be used in other outdoor areas with pots and containers, provided a hose connection is available. However, its dual misting/dripping feature is particularly suited to the greenhouse environment.

It connects to a standard garden hose.

The misters are designed to create a fine spray of water, increasing humidity in the surrounding area, which is beneficial for germination and certain types of plants within a greenhouse.

This specific kit focuses on a set distribution through misters and drippers. For individual flow adjustment, separate components might be needed depending on the complexity required.

Ensure the main hose connection has adequate water pressure. Check for any kinks in the tubing. Make sure drippers are not clogged and are inserted correctly into the soil.

Gently clean the mister nozzles with a small brush or a pin to remove any sediment or mineral buildup. Ensure they are properly connected to the main tubing.

Check that the hose connection is secure and that the washer within the connection is present and in good condition. Tighten the connection firmly but avoid overtightening.

Verify that the dripper spike is fully inserted into the soil. Ensure the tubing leading to the dripper is not kinked and that water is flowing through the main system.