Harris Seriously Good 4Inch Roller Sleeves 10 Pack - Medium Pile

Currently unavailable

Currently unavailable
The Harris Seriously Good 4" Medium Pile Roller Sleeves 10 Pack is designed for DIY painters seeking smooth and consistent paint application on walls and ceilings. This pack offers a cost-effective solution for achieving even coverage with reduced splatter, particularly on semi-smooth surfaces like plaster. While they provide excellent results, users should ensure they are compatible with a 4" mini roller frame and are aware that packaging may vary.
| Brand | Harris |
|---|
These medium pile roller sleeves are suitable for most emulsion paints (water-based paints) used on walls and ceilings.
While they are designed for semi-smooth surfaces like plaster, they may not perform optimally on heavily textured walls. For very rough textures, a longer pile roller might be more appropriate.
Immediately after use, wash the sleeve with warm water and soap until all paint is removed. Squeeze out excess water and let it air dry completely before storing.
These sleeves are specifically designed for Harris 4" mini roller frames.
This pack contains 10 roller sleeves.
These are primarily designed for paint application. For varnishing, a different type of roller sleeve, often with a finer nap, might be recommended to achieve the desired finish.
Ensure the roller sleeve is fully saturated with paint but not overloaded. Check that the surface is properly prepared and free of debris. If reusing, ensure the sleeve is clean and free of dried paint.
Avoid overloading the roller with paint. Apply paint with a consistent, steady motion. Ensure you are not applying excessive pressure when rolling.
Confirm you are using a compatible 4" mini roller frame. Ensure the sleeve is pushed fully onto the frame's barrel and end cap.
Setup: To set up, simply slide one Harris Seriously Good 4" Medium Pile Roller Sleeve onto a compatible Harris 4" mini roller frame. Ensure the sleeve is seated securely on the end cap and barrel of the frame before applying paint.
Compatibility: These roller sleeves are designed to work with Harris 4" mini roller frames. Using frames from other brands may result in a less secure fit or suboptimal performance.
Care: For single-use projects, dispose of the sleeve after painting. For reuse, immediately after finishing painting, wash the roller sleeve thoroughly with warm water and soap until all paint residue is removed. Squeeze out excess water and allow the sleeve to air dry completely before storing in a clean, dry place. Store sleeves away from direct sunlight and extreme temperatures to maintain their pile integrity.