EAI Door Hinges - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
These EAI Ball Bearing Hinges in Silver are designed for homeowners and builders seeking durable, smooth-operating hardware for internal doors. Offering superior load-bearing capacity and longevity compared to standard hinges, they provide a reliable and refined finish. A potential consideration is their suitability only for internal use.
All features
| Colour | Silver |
|---|---|
| Brand | EAI |
Extended Product Information
FAQs
Are these hinges suitable for exterior doors?
No, these EAI Ball Bearing Hinges are specifically designed and recommended for internal doors only due to their construction and finish.
What is the main advantage of ball bearing hinges?
The primary advantage is their extremely smooth operation and their ability to support heavier loads with less wear and tear compared to standard butt hinges.
How many hinges are in a pack?
Each pack contains two pairs of hinges, meaning a total of four individual hinges.
Do I need to lubricate these hinges?
Generally, no. The ball bearings provide lubrication. However, if you notice any squeaking after extended use, a light application of silicone lubricant to the pin can help.
Can I use these hinges on fire doors?
These hinges are designed for standard internal doors. For fire doors, specific fire-rated hardware is required, so please consult fire safety regulations and product specifications.
What type of screws are included?
The pack includes matching screws designed for typical internal door and frame installations. Ensure screw length is appropriate for your specific door and frame thickness.
How do I clean the silver finish?
Use a soft, damp cloth. For stubborn marks, a mild soap solution can be used, followed by rinsing with a clean damp cloth and drying thoroughly. Avoid abrasive cleaners.
Troubleshooting
Door is stiff or doesn't swing smoothly.
Check that all screws are securely tightened and that the door is properly seated in its frame. Ensure there are no obstructions. If the issue persists, the hinge pin might need slight adjustment or lubrication.
Hinges are squeaking.
While ball bearing hinges are designed to be quiet, prolonged use can sometimes lead to noise. Apply a small amount of silicone-based lubricant to the hinge pin and work the door back and forth.
Door is sagging.
Ensure the hinges are correctly installed with all screws fully tightened into the door and frame. If the door is particularly heavy or the frame is soft, consider reinforcing the mounting points or using additional hinges.
Silver finish appears dull.
Clean the hinges with a soft, damp cloth and mild soap if necessary. Avoid harsh chemicals or abrasive pads that can scratch the finish. Ensure they are dried thoroughly after cleaning.
Pros and Cons
Pros
- Smooth and quiet door operation.
- Long-lasting durability for frequent use.
- Suitable for heavier internal doors.
- Includes all necessary screws for installation.
- Aesthetically pleasing silver finish.
Cons
- Not suitable for exterior doors.
- Requires precise alignment during installation.
- Might be overkill for very lightweight internal doors.
Setup, Compatibility & Care
Setup:
- Ensure the door and frame are prepared for hinge installation, noting the correct mortise depth.
- Position the hinges on the door and frame, marking screw hole locations.
- Pre-drill pilot holes for the screws to prevent wood splitting.
- Secure the hinges using the provided screws, ensuring they are aligned properly.
Compatibility:
- Designed exclusively for internal doors.
- Compatible with most standard wooden internal doors.
- Verify screw length is appropriate for your door and frame thickness.
Care:
- Clean with a soft, damp cloth. Avoid abrasive cleaners that could damage the silver finish.
- Periodically check screws for tightness, especially on heavier doors.
- Lubrication is typically not required due to the ball bearing mechanism, but a light spray of silicone lubricant can be used if any squeaking develops over extended periods.