Best current price£29.58from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£29.58Visit shop Sealey S717g Gravity Feed Spray Gun 1.7Mm Set-Up
Visit shop
B&Q£34.48Visit shop B&Q - Gravity Feed Spray Gun 2-Stage Trigger Control 1.3mm Set-Up S713G
Visit shop34 offers from £29.58 - £39.60
View price history by clicking the chart icon.
The Sealey S713G is a professional-grade gravity-fed spray gun tailored for automotive refinishing specialists and experienced hobbyists who demand a consistent, high-quality paint finish. Its key benefit lies in the granular control it offers over spray patterns and fluid output, making it ideal for precision bodywork; however, its professional nature means it requires regular maintenance and a steady hand to get the best results compared to entry-level consumer models.
| Model Part Number | S713G |
|---|---|
| Brand | Sealey |
Yes, provided the gun is cleaned thoroughly with the correct cleaning agents immediately after use to prevent corrosion.
The 1.3mm set-up is the industry standard for automotive basecoats and clear coats, providing the ideal balance of flow and atomization.
Apply a small amount of non-silicone gun oil to the needle shaft during reassembly after cleaning to keep movement smooth.
Refer to your paint manufacturer's technical data sheet, but generally, 25-35 PSI is the optimal range for this model.
Yes, Sealey provides service components; please refer to your specific parts diagram for the exact seal kit numbers.
Check that the fluid nozzle is tightened correctly and that the fluid needle is not obstructed by dried paint.
Ensure your air compressor is delivering sufficient volume and pressure; check the fluid adjustment knob for incorrect settings.
Clean the fluid needle seat and inspect for debris or damage; ensure the nozzle is properly seated.
Before your first use, ensure the spray gun is thoroughly cleaned, as protective oils from manufacturing may remain. Connect the gun to an air source equipped with an oil/water separator to prevent surface contamination.
