Godox Wireless Flash Receiver - Canon
Best current price£39.00from OnBuy.com
Best offers
Shopping.co.uk recommended and popular offers
OnBuy.com£39.00Visit shop Godox X1r-Canon Receiver Wireless Flash Receiver Canon Cameras
Visit shopOnBuy.com£39.00Visit shop All Offers
2 offers from £39.00
View price history by clicking the chart icon.
OnBuy.comGodox X1r-Canon Receiver Wireless Flash Receiver Canon Cameras
Free delivery in 1–3 days
£39.00
Visit shop
Godox X1r-Canon Receiver Wireless Flash Receiver Canon Cameras 5060198245190Free delivery in 1–3 days£39.00Visit shop →
Product Information
Full details
The Godox X1R Receiver is designed for Canon DSLR camera users looking to wirelessly control and fire flashes that lack built-in receivers. Its key benefit is enabling TTL wireless flash triggering, offering seamless integration with Godox X-Series triggers and compatible Canon flashes. A caveat is its primary design for Canon systems, which may limit cross-brand compatibility for advanced features.
All features
| Brand | Godox |
|---|
Extended Product Information
FAQs
What is the main purpose of the Godox X1R Receiver?
The Godox X1R Receiver allows you to wirelessly trigger and control flashes that do not have built-in wireless receivers, using Godox X-Series triggers. It enables TTL communication between the camera and the flash.
Can I use the X1R Receiver with flashes from brands other than Godox?
Yes, the X1R Receiver offers partial or full compatibility with non-Godox speedlites. However, full TTL functionality and advanced settings may be limited compared to Godox flashes.
What cameras are compatible with the X1R-C model?
The X1R-C model is specifically designed for Canon DSLR cameras.
How do I set up the receiver with my flash?
Connect the X1R Receiver to the sync jack port of your flash using the appropriate cable. Ensure the receiver is powered (usually by the flash itself) and then set the same channel and group as your Godox X-Series transmitter.
What is the maximum wireless range of the X1R Receiver?
The Godox X1R Receiver supports a wireless range of up to 100 meters (328 feet) when used with a compatible Godox trigger.
Does the X1R Receiver require its own batteries?
Most Godox receivers, including the X1R, draw power directly from the connected flash unit via the sync jack and typically do not require separate batteries.
What does the 'C. FN' setting refer to?
C. FN stands for Custom Function. These settings allow you to personalize the receiver's behavior and features according to your specific shooting needs.
Troubleshooting
Flash does not fire
Ensure the X1R Receiver and X1T Transmitter are powered on and set to the same channel and group. Check that the sync cable is securely connected to the flash and receiver. Verify the flash is in a compatible mode (TTL or Manual) and has sufficient power. Test with a different flash or receiver if possible.
Inconsistent TTL exposure
Confirm that both the camera and flash are fully compatible with the X1R-C for TTL. Ensure the flash is not in a power-saving mode. Adjust flash exposure compensation (FEC) on the transmitter if needed. Check for any obstructions between the transmitter and receiver.
Receiver not detected by transmitter
Turn both devices off and then back on. Double-check that the channel and group settings match exactly on both the transmitter and receiver. Ensure the receiver has fresh batteries if it has its own power source (most receivers draw power from the flash).
Limited range or signal loss
Ensure there are no major obstructions between the transmitter and receiver. Try moving closer to the flash. Check for potential sources of interference, such as other wireless devices operating on similar frequencies. Update firmware on the trigger if available.
Pros and Cons
Pros
- Enables TTL control for non-receiver flashes.
- Extends the functionality of older Godox flashes.
- Offers flexibility with non-Godox speedlites.
- Intuitive controls via the LCD panel.
- Reliable wireless performance with good range.
Cons
- Primarily optimized for Canon systems (X1R-C model).
- Full compatibility may vary with non-Godox flashes.
- Requires a Godox trigger for operation.
- May not support all advanced functions of every flash model.
Setup, Compatibility & Care
Setup:
- Ensure your camera is a compatible Canon DSLR model.
- Connect the Godox X1R Receiver to the sync jack port of your flash unit using the provided cable.
- Mount the Godox X1T Transmitter onto your camera's hot shoe.
- Turn on both the transmitter and the receiver.
- Set the transmitter and receiver to the same channel and group to establish communication.
- Configure flash settings (TTL, manual power, zoom) via the transmitter.
Compatibility:
- Camera Mount: Canon DSLR cameras.
- Flash Compatibility: Primarily designed for Godox flashes with a sync jack. Can be used with other branded speedlites, but TTL and advanced functions may be limited or require manual mode.
- Trigger Compatibility: Works with Godox X-Series wireless flash triggers (e.g., X1T, X2T).
Care:
- Keep the receiver clean and dry.
- Avoid exposing it to extreme temperatures or direct sunlight for prolonged periods.
- Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasives.
- Store the receiver in a protective case when not in use.