Best current price£94.95from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£94.95Visit shop Festo Precision Pressure Regulator G1/8'' 0.1-6Bar 300L/Min - 2416371
Visit shop1 offer from £94.95
View price history by clicking the chart icon.
This Festo Precision Pressure Regulator is designed for pneumatic systems requiring stable and accurate air pressure control. It is ideal for industrial automation, process control, and any application demanding reliable pneumatic performance within its specified range. While offering exceptional stability and a lockable design for security, users should note its specific G1/8 connection and the operational temperature limits. Key features include a wide pressure regulation range, high nominal flow rate, minimal pressure hysteresis, primary pressure compensation, and secondary venting.
| Brand | Festo |
|---|
The regulator is designed for an output pressure range of 0.1 to 6 bar. The maximum inlet pressure should be above this range to allow for regulation.
After setting the desired pressure using the control knob, push the knob down until it clicks into the locked position. This prevents accidental changes.
Hysteresis refers to the difference in the setpoint when approaching it from a lower pressure versus a higher pressure. Minimal hysteresis (0.02 bar) means the regulator provides a very tight and consistent output pressure, regardless of how that pressure was achieved.
This regulator is specifically designed for use with clean, dry compressed air. Using other gases may damage the internal components or pose a safety risk.
The regulator has a standard nominal flow rate of 300 liters per minute (l/min).
The regulator can operate reliably within a temperature range of -10°C to +60°C.
The regulator is not designed for user disassembly for cleaning. If performance degrades, check upstream filters. For internal issues, it is recommended to replace the unit or consult Festo support.
Check for leaks in the downstream pneumatic lines or connections. Ensure the control knob is properly locked. Verify that the upstream pressure is within the regulator's operating range and is higher than the set downstream pressure.
Verify that the upstream pressure is sufficient. Check for blockages in the inlet port or internal components. Ensure the regulator is not set to a very low pressure which could restrict flow.
Ensure the compressed air supply is stable and filtered. Check for potential vibrations near the regulator. Confirm the upstream pressure is consistently above the set downstream pressure.
Ensure the regulator is de-pressurized before attempting adjustment. Check for debris or damage around the control knob mechanism. If persistent, contact support.
Setup:
Compatibility:
Care:
