Shopping.co.uk

Straight Coupler Universal Compression Waste Fittings - Fluidmaster

Straight Coupler Universal Compression Waste Fittings - Fluidmaster

This 32mm x 32mm straight waste pipe coupler, crafted from durable polypropylene, offers a fast an...

Best current price£4.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

3 offers from £4.99 - £14.99

View price history by clicking the chart icon.

eBay32x32mm Straight Coupler Universal Compression Waste Fittings (1 1/4"")
£4.99 delivery
£4.99
Visit shop
B&QB&Q - 32X32mm Straight Coupler Universal Compression Waste Fittings (1 1/4")
Free delivery in 1–3 days
£14.99
Visit shop

Product Information

Full details

This Fluidmaster 32mm straight waste pipe coupler is for plumbers and DIY enthusiasts needing to quickly join two 32mm waste pipes. Its key benefit is the universal compression multi-fit system, allowing hassle-free connection to various pipe materials without solvent welding. A potential caveat is that it's specifically for 32mm (1 1/4") pipes, so ensure this is the correct size for your application. This coupler provides a durable polypropylene solution for reliable waste pipe extensions and repairs.

All features

Model Part NumberZB39400DB
BrandFluidmaster

Extended Product Information

FAQs

What pipe sizes does this coupler fit?

This coupler is specifically designed for 32mm (approximately 1 1/4 inch) diameter waste pipes.

Do I need glue or special tools to install this?

No, this is a compression fitting. You do not need glue or solvent. Standard wrenches may be needed for final tightening.

Can I use this on hot water pipes?

This coupler is intended for standard waste pipe applications and is not designed for pressurized hot water systems.

What types of pipes can I connect with this coupler?

It is compatible with plastic (ABS, PVC), copper, and lead waste pipes.

How tight should I make the compression nuts?

Hand-tighten first, then use a wrench to tighten an additional 1/2 to 1 full turn. Avoid overtightening, which can damage the fitting or pipe.

Is this product suitable for outdoor use?

The polypropylene material is weather-resistant, but it's primarily designed for indoor plumbing systems. Ensure it is protected from extreme environmental conditions if used outdoors.

Troubleshooting

Leak at the joint after installation

Ensure the pipes were fully inserted into the coupler before tightening. Try tightening the compression nuts slightly further (approx. 1/4 turn). Check that the pipe ends are clean and free of damage.

Difficulty inserting pipe into coupler

Verify that you are using 32mm pipes. Ensure the pipe ends are not deformed or damaged. Slightly chamfering the pipe edge can sometimes help.

Compression nut is difficult to tighten

Check for any cross-threading or debris in the threads. Ensure the pipe is seated correctly within the coupler body.

Pros and Cons

Pros

  • Quick and easy installation without the need for adhesives or specialized tools.
  • Versatile compatibility with multiple pipe materials (plastic, copper, lead).
  • Durable construction ensures a long service life.
  • Reduces project time and complexity compared to solvent welding methods.
  • Reliable for both residential and commercial plumbing applications.

Cons

  • Limited to 32mm pipe sizes only.
  • Requires sufficient access for tightening the compression fittings.
  • May not be suitable for high-pressure applications (standard waste pipe pressure).
  • Initial cost might be higher than basic solvent weld fittings.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure the ends of the two 32mm waste pipes are clean, free from debris, and cut squarely.
  2. Loosen the compression nuts on both sides of the coupler.
  3. Slide the compression nuts onto the ends of the pipes.
  4. Insert the ends of the 32mm pipes fully into the corresponding openings of the coupler.
  5. Slide the nuts back into position and hand-tighten them firmly.
  6. Using appropriate tools (e.g., pipe wrenches), tighten the compression nuts an additional 1/2 to 1 full turn to secure the seal. Do not overtighten.

Compatibility:

  • Pipe Diameter: Exclusively designed for 32mm (1 1/4") diameter pipes.
  • Pipe Materials: Compatible with plastic (ABS, PVC), copper, and lead waste pipes.

Care:

  • The polypropylene material is low-maintenance. Periodically inspect the compression fittings for any signs of leakage.
  • If cleaning is required around the area, use a damp cloth. Avoid abrasive cleaners that could damage the plastic.

Price History

DatePrice
Visit shop