Taps2Traps Equal Elbows - 15mm
Best current price£21.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£21.99Visit shop B&Q - Pack Of 10 X 15mm Equal Elbows Brass Compression Fittings En & Wras Approved
Visit shopB&Q£21.99Visit shop One Offer
1 offer from £21.99
View price history by clicking the chart icon.
B&QB&Q - Pack Of 10 X 15mm Equal Elbows Brass Compression Fittings En & Wras Approved
Free delivery in 1–3 days
£21.99
Visit shop
Product Information
Full details
This guide is for plumbers and DIY enthusiasts working on residential or commercial plumbing systems. The Taps2Traps 15mm Equal Elbows offer a reliable and certified solution for changing the direction of pipework. A key consideration is ensuring proper installation techniques to maintain system integrity.
All features
| Model Part Number | 15mm |
|---|---|
| Brand | Taps2Traps |
Extended Product Information
FAQs
Are these elbows suitable for gas lines?
No, these Taps2Traps elbows are specifically designed for water systems and are WRAS certified for potable water applications only. They are not suitable for gas.
Can I use these with push-fit pipe systems?
No, these are compression fittings and require a compression nut and ring. They are not compatible with push-fit plumbing systems which use a different connection mechanism.
What is WRAS certification?
WRAS (Water Regulations Advisory Scheme) approval means the product has been scrutinized and meets the high standards set by UK water regulations for materials and products used in contact with drinking water. It ensures the product is safe and does not contaminate the water supply.
Do I need to use PTFE tape or jointing compound?
Generally, for compression fittings like these, PTFE tape or jointing compound is not required on the compression joint itself. The seal is made by the compression ring deforming onto the pipe and into the fitting. However, if connecting to a threaded component, appropriate sealant should be used on the threads.
What is the maximum length of pipe that should enter the fitting?
The pipe should be inserted fully until it meets the internal stop within the elbow. The compression ring should sit just behind this point. Ensure the pipe is not inserted too far, which could obstruct flow.
Can these be used in exposed or buried applications?
While the brass is durable, it is recommended to protect compression fittings from excessive physical impact or harsh environmental conditions. For buried applications, specific sleeving or protection methods may be required according to local plumbing codes.
Troubleshooting
Leak from the compression joint
Ensure the pipe is clean and inserted fully. Check that the compression ring (olive) is correctly positioned. Tighten the compression nut further (usually an additional 1/4 to 1/2 turn) while ensuring not to overtighten, which can damage the pipe or fitting.
Difficulty tightening the nut
Check for cross-threading or debris on the threads. Ensure the pipe is straight and properly seated within the fitting.
Fitting does not achieve a seal
Verify the pipe is suitable for compression fittings and meets the 15mm standard. Ensure the fitting itself is not damaged or defective. Check that the working pressure and temperature do not exceed the fitting's specifications.
Pros and Cons
Pros
- WRAS certification ensures compliance and safety.
- Durable brass construction offers long-term reliability.
- Suitable for both hot and cold water systems.
- Easy compression fitting simplifies installation.
- Pack of 10 offers good value for multiple uses.
Cons
- Maximum working temperature of 85°C may not suit extreme industrial applications.
- Requires proper adherence to installation guidelines to prevent leaks.
- Primarily designed for specific sizes (15mm); not a universal fitting.
Setup, Compatibility & Care
Setup:
- Ensure the pipe ends are clean, free from burrs, and cut squarely.
- Slide the compression nut onto the pipe, followed by the compression ring (olive).
- Insert the pipe end fully into the elbow fitting.
- Slide the compression ring up to the fitting body.
- Thread the compression nut onto the fitting and tighten it by hand until snug.
- Using a wrench, tighten the nut an additional 1/2 to 3/4 turn (refer to manufacturer's specific torque guidelines if available).
Compatibility:
- Compatible with 15mm copper pipes conforming to EN 1057.
- Compatible with specific types of plastic pipes designed for compression fittings (always check pipe manufacturer's recommendations).
- Not suitable for galvanized steel or threaded pipe systems.
Care:
- These fittings require no routine maintenance once installed correctly.
- Periodically check connections in accessible areas for any signs of weeping or leaks, especially after initial use or significant system pressure changes.
- Avoid using abrasive cleaners on the external brass surface; a damp cloth is sufficient for cleaning.