Best current price£24.96from eBay
Shopping.co.uk recommended and popular offers
eBay£24.96Visit shop FAST MOVER FMT 4001 GRAVITY SPRAY GUN 1.4mm TIP PRIMER, PAINT, SPRAY ADHESIVES
Visit shop
B&Q£64.26Visit shop - Fmt4001G1.4 Conventional Gravity Spray Gun600Cc Pot1.4mm Nozzle Set Up
Visit shop2 offers from £24.96 - £64.26
View price history by clicking the chart icon.
The Fast Mover FMT 4001 Gravity Spray Gun is a robust, professional-grade tool engineered for demanding shop environments, specifically excelling in primer applications. Designed for users who prioritize reliability and consistent results with solvent-based paints, it provides a versatile 1.4mm nozzle setup for varied automotive and industrial tasks. While it offers exceptional durability and control, users should note that it is a conventional spray system, which may require more precise air pressure management compared to modern HVLP alternatives.
| Model Part Number | FMT4001G1.4 |
|---|---|
| Brand | Fast Mover |
This model is specifically designed and optimized for solvent-based paints.
The FMT 4001 comes with a 1.4mm nozzle installed.
You must use the 3M adapter number 2 (code 16032) to interface between the gun and the pot system.
Yes, the series supports sizes ranging from 1.3mm to 2.5mm for different applications.
It is primarily designed for high-performance primer applications.
Check for loose nozzle or debris in the air cap; clean the nozzle and ensure it is tightened correctly.
Verify there is sufficient paint in the pot and check for air leaks at the pot connection or nozzle assembly.
Adjust the air pressure regulator to a lower setting and ensure the fluid control knob is calibrated for the current viscosity.
To begin, ensure the air compressor output is clean and moisture-free using an inline filter. Attach the air hose to the inlet and verify that the nozzle is securely tightened. For those using the 3M PPS system, screw on the 3M adapter (number 2/16032) before attaching the disposable liner and lid.
After use, flush the gun immediately with an appropriate cleaning solvent to prevent material buildup in the internal passages. Periodically remove the air cap and nozzle to soak them in solvent, using a soft brush to clean the needle. Never use metal wires or hard objects to clear nozzle orifices, as this will deform the precision machining and ruin the spray pattern.
